SHAPE Shoulder Mount Kit with Matte Box and Follow Focus for Sony a7S III/a7 IV

Support your Sony a7S III or a7 IV mirrorless camera for handheld shoots with the Shoulder Mount Kit from SHAPE. The kit includes an aluminum camera cage, a wood-lined top handle with push-button adjustment, a baseplate with a 15mm LWS quick release rod system, a follow focus, a two-stage 4 x 5.6" matte box, a lens support bracket, a V-lock adapter, an HDMI cable clamp, two 18" 15mm rods, dual handgrips with push-button adjustment, a shoulder mount, and a back pad.

The cage and top handle provide numerous mounting points for accessories, including 1/4" -20 threads, 3/8" -16 ARRI-style accessory mounts, shoe mounts, and a 15mm rod port. The camera mounts onto the baseplate, which features an integrated 15mm LWS rod clamp for the included 15mm rods and a V-lock quick release mount. The lens support bracket mounts on the baseplate to support long, heavy lenses.

The follow focus mounts onto one of the 15mm rods and includes a drive gear set, crank, whip, and marking disks, and it can swing away for lens changes. The matte box mounts on 15mm rods, features two rotating stages, and fits up to two 4 x 5.6" filters. It comes with side and top flags, fits a lens front diameter from 52 to 114mm, and includes a step-up filter ring set. The HDMI clamp prevents your HDMI cables from pulling or disconnecting. The dual handgrips mount onto the front of the rods and can be quickly adjusted using the push-button design. A shoulder pad mounts onto the back of the rods for a comfortable fit, and a back pad attaches to add security and counterweight.

SHAPE Quick Handle + Rod Block

The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360° . You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

Quick Handle

Provides professional video stabilization with 2 handles

Each handle offers 360° individual rotation

Offers easy attachment/removal

Rod Block

Composed of anodized aluminum

Offers composite camera support for all 15mm rods

Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob

With 2 screw-threaded holes, the Rod Block provides for attachment of components

EAN: 629266000793

SHAPE Mini Composite Shoulder Pad

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob s screw is a 1/4" -20 screw. If you remove the Screw Knob, you ll have yourself a 1/4" -20 screw-hole to add various 1/4" -20-mount accessories into.

EAN: 629266000830

SHAPE Back Pad

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad s position can be adjusted to the user s preference up to 2" vertically and 360° horizontally.

Compatible Support Series

• Composite
• Cameleon
• Sumo
• Spider

EAN: 629266001202

SHAPE 15mm Rods (18" , Pair)

These Shape s 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

Pair of aluminum support rods for 15mm rod clamps.

18" long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn t perfectly aligned or is at a slight angle to the rod clamp.

EAN: 629266002223

SHAPE Follow Focus Kit with Single 15mm Rod Clamp

Use the compact SHAPE Follow Focus Kit with Single 15mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.

At the core of the kit is a rubber, anti-slip follow focus wheel attached to a single aluminum 15mm rod clamp. The clamp rotates to adjust to most lens sizes, and it s tightened by a locking lever. The clamp s rotation also allows the focus wheel to easily swing out of the way when changing lenses.

Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses.

For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel.

Modular design allows for addition and removal of components without tools or screws. Its compact size allows it to fit easily with lens accessories like a matte box.

The rubber follow focus wheel is attached to an adjustable, aluminum 15mm rod clamp which can swing away when changing lenses.

The focus wheel fits most lens sizes. Five drive gears are included: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T.

A rubber friction wheel is included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses.

An 11" whip and a speed crank are included. Each connects to the focus wheel for fine adjustments.

Four magnetic marking disks are included to attach to the focus wheel.

EAN: 629266008645

SHAPE 2-Stage 4 x 5.6" Clip-On and 15mm LWS Rod-Mounted Matte Box

The SHAPE 2-Stage 4 x 5.6" Clip-On and 15mm LWS Rod-Mounted Matte Box provides filmmakers flare and glare protection when creating their images, whether in a minimal configuration or on a large studio shoot. The matte box can be used either as a clip-on matte box when not using rods or with 15mm LWS rod supports, providing you the flexibility to use the same matte box in either shooting situation. The matte box comes with 114 and 84mm clip-on adapter rings.

The matte box features two rotating 4 x 5.6" filter stages, ideal for use with polarizers, grad, and effect filters. The two included 4 x 5.65" filter holders feature a spring-latch system to hold your filters securely, and each filter stage has a locking knob that enables you to precisely set the height of your filter in the stage. The matte box accepts lenses with a front diameter up to 114mm, and it includes an 82mm filter ring. It comes with six step-down rings that allow you to use lenses with an outer diameter of 52, 58, 62, 67, 72, and 77mm, preventing light from sneaking past the lens from behind the camera and degrading your image.

Compatibility

Photo lenses with a minim