Tilta Camera Cage Basic Kit for Sony a7C II & a7CR (Titanium Gray)

Tilta TA-T60-A Overview

Protect your Sony a7C II or a7CR camera while adding accessory mounting points and making it more shoot-friendly with this Camera Cage Basic Kit from Tilta. The kit includes a titanium gray full camera cage for the Sony a7C II and a7CR, a 15mm LWS baseplate, a compact NATO top handle, a NATO rail attachment, and two 7.9" aluminum 15mm rods.

The modular camera cage features multiple 1/4" -20 accessory threads, ARRI-compatible anti-twist divots, an HDMI cable clamp, lens support threads, and strap slots. The top handle features multiple 1/4" -20 and 3/8" -16 mounting threads and a shoe mount and mounts onto the cage using the NATO rail attachment. The cage can mount onto the 15mm baseplate, which accepts the included standard 15mm rods and mounts onto an optional dovetail.

Tilta Full Camera Cage for Sony a7C II & a7CR (Titanium Gray)

In a robust formfitting design, this titanium gray Full Camera Cage from Tilta protects your Sony a7C II or a7CR mirrorless camera and provides a shoe mount, multiple 1/4" -20 anti-twist accessory threads, an HDMI cable clamp, a side NATO rail, two front lens adapter threads, and a strap slot.

On the bottom of the cage, an integrated Arca-type base as well as 1/4" -20 and 3/8" -16 mounting threads allow you to mount your camera onto tripods, gimbals, and other supports.

EAN: 810076278582

Tilta Tiltaing Compact NATO Top Handle (Titanium Gray)

Carry and stabilize your Tiltaing camera cage with the titanium gray Tiltaing Compact NATO Top Handle from Tilta. This compact quick release top handle is smaller than the standard Tiltaing quick release handle and well suited for use with smaller cameras or when a smaller shooting package is desired. There is one shoe mount on top and multiple 1/4" -20 and 3/8" -16 threads, each featuring anti-twist divots.

The aluminum and stainless steel handle mounts securely onto a camera cage, such as the Tilta Full Camera Cage for Sony a7 IV, using its NATO clamp and locking lever.

Compatibility

Camera cages with a standard NATO rail

Also compatible with but not limited to:
Tilta Full Camera Cage for Sony a7 IV (TA-T30-FCC)

EAN: 810076275963

Tilta Modular 15mm LWS Baseplate Type III (Titanium Gray)

Add this titanium gray Modular 15mm LWS Baseplate Type III from Tilta to your camera rig setup and expand your mounting options to accommodate a variety of optional rod-based accessories such as matte boxes and follow focus motors. The modular design provides multiple 1/4" -20 and 3/8" -16 mounting points and a removable Arca-type receiver that allows you to quickly switch between this baseplate and compatible gimbals like the DJI Ronin S series.

Compatible with Tilta standard dovetails, this baseplate can also host a wide variety of quick release plates via the multiple 1/4" -20 and 3/8" -16 threads on the bottom of the unit. Two LWS 15mm rod ports enable you to add optional 15mm rods to further enhance mounting possibilities, and the sturdy aluminum and steel construction ensures durability and reliability for filmmakers or videographers on the go.

Modular Design

Features a removable Arca-type receiver and universal 1/4" -20 mounting points

15mm Rod Support

Attach optional 15mm rods to your camera rig for enhanced mounting possibilities

Dovetail Support

Easily slides and locks onto Tilta standard dovetails

EAN: 810076276120

Tilta Threaded 15mm Rod (Black, 8" , Single)

Tilta's 8" Threaded 15mm Rod is a 8" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.

The rod is made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.

Lightweight anodized aluminum construction

The chamfered end eases mounting of rod-based accessories

Both ends are threaded for extending the length of the rod

EAN: 709016726958