Tilta Camera Cage Pro Kit for Canon R7 (Black)

Tilta TA-T59-B-B Overview

Protect, carry, and add accessory mounting options to your Canon R7 mirrorless camera using this aluminum Camera Cage Pro Kit from Tilta. The Pro kit includes the full camera cage for the R7, a compact NATO top handle, a NATO rail attachment with a 1/4" -20 anti-twist screw, a modular 15mm LWS baseplate, two 8" 15mm rods, an HDMI/USB-C cable clamp, and an EF-R mount adapter support.

The cage provides all-around protection, an integrated Arca-type base, a NATO side rail, a shoe mount, and multiple 1/4" -20 threads, plus 1/4" -20 and 3/8" -16 tripod threads on the bottom. The NATO rail attachment mounts onto the top of the camera, allowing the top handle to clamp on top for easy mounting and unmounting. The cage mounts onto the 15mm LWS baseplate, which includes two rods and features a removable Arca-type receiver.

Tilta Full Camera Cage for Canon R7 (Black)

Protect and add accessory mounting options to your Canon R7 mirrorless camera using this aluminum Full Camera Cage from Tilta. This cage provides all-around protection, an integrated Arca-type base, and compatibility with the DJI RS3 Pro and Arca-Swiss compatible systems.

Accessory mounting options include one NATO side rail, a shoe mount, and multiple 1/4" -20 threads. There are also 1/4" -20 and 3/8" -16 mounting threads on the base for alternate rig and plate mounting. The cage comes with an HDMI/USB-C cable clamp to prevent pulling and disconnects, a support for the Tilta EF-R lens mount adapter, and an Allen wrench which stores in the base of the cage and tightens the camera screw.

Compatibility

Canon EOS R7 mirrorless camera

EAN: 810076278681

Tilta Tiltaing Compact NATO Top Handle (Black)

Carry and stabilize your Tiltaing camera cage with the black Tiltaing Compact NATO Top Handle from Tilta. This compact quick release top handle is smaller than the standard Tiltaing quick release handle and well suited for use with smaller cameras or when a smaller shooting package is desired. There is one shoe mount on top and multiple 1/4" -20 and 3/8" -16 threads, each featuring anti-twist divots.

The aluminum and stainless steel handle mounts securely onto a camera cage, such as the Tilta Full Camera Cage for Sony a7 IV, using its NATO clamp and locking lever.

Compatibility

Camera cages with a standard NATO rail

Also compatible with but not limited to:
Tilta Full Camera Cage for Sony a7 IV (TA-T30-FCC)

EAN: 810076274201

Tilta Modular 15mm LWS Baseplate Type III (Black)

Add this black Modular 15mm LWS Baseplate Type III from Tilta to your camera rig setup and expand your mounting options to accommodate a variety of optional rod-based accessories such as matte boxes and follow focus motors. The modular design provides multiple 1/4" -20 and 3/8" -16 mounting points and a removable Arca-type receiver that allows you to quickly switch between this baseplate and compatible gimbals like the DJI Ronin S series.

Compatible with Tilta standard dovetails, this baseplate can also host a wide variety of quick release plates via the multiple 1/4" -20 and 3/8" -16 threads on the bottom of the unit. Two LWS 15mm rod ports enable you to add optional 15mm rods to further enhance mounting possibilities, and the sturdy aluminum and steel construction ensures durability and reliability for filmmakers or videographers on the go.

Modular Design

Features a removable Arca-type receiver and universal 1/4" -20 mounting points

15mm Rod Support

Attach optional 15mm rods to your camera rig for enhanced mounting possibilities

Dovetail Support

Easily slides and locks onto Tilta standard dovetails

EAN: 810076276113

Tilta Threaded 15mm Rod (Black, 8" , Single)

Tilta's 8" Threaded 15mm Rod is a 8" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.

The rod is made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.

Lightweight anodized aluminum construction

The chamfered end eases mounting of rod-based accessories

Both ends are threaded for extending the length of the rod

EAN: 709016726958