Tilta Tiltaing Panasonic GH Series Cage Kit C (Black)

Tilta Full Cage for Panasonic GH Series (Black)

Suit up your Panasonic GH4, GH5, or GH5S camera with this Full Cage for Panasonic GH Series from Tilta. This formfitting, dedicated cage protects four sides of your camera without interfering with its operation and is compatible with Tilta Type I Side Handles. The cage provides two cold shoe mounts and multiple 1/4 -20 and 3/8 -16 mounting threads for adding accessories like top and side handles, monitors, and microphones.

The base of the GH Series cage incorporates several mounting threads that enable you to easily fine-tune the balance of your setup when mounting your camera on a gimbal. A variety of optional baseplates can be attached to the bottom of the cage to add rod mounting and/or a power supply. This cage includes a Tiltaing hand strap.

Compatibility

Panasonic GH Series cameras

Tilta Type I side handles

Tilta Quick Release Top Handle (Black)

EAN: 631384551422

This Tilta Quick Release Top Handle, in black, is a durable, sculpted top handle that attaches securely to a cold shoe and provides accessory mounting points, in addition to a top handle grip for your camera. The quick release handle s features include two cold shoe mounts, one in the front with a spring-loaded safety latch and the second on the back. The handle also features a 15mm rod port and multiple 1/4 -20 and 3/8 -16 threads with and without anti-twist divots.

The aluminum and stainless steel handle attaches to your camera or cage using the included spring-loaded thumbscrew. The 15mm rod port features a locking lever to secure the rod in place. On the front face of the handle, there is a 1/4 -20 threaded mounting hole with anti-twist divots. Multiple 1/4 -20 and 3/8 -16 threaded mounting holes are machined into the top and sides of the handle.

Tilta Side Power Handle Run/Stop Cable for Panasonic GH4/5/5s and S1H

EAN: 614234707620

This Run/Stop Cable is designed for the Tilta Side Power Handle with Run/Stop. It has a coiled design and allows you to connect the handle to the Panasonic GH4, GH5, GH5s, and S1H to allow run/stop control from the handle. A 7-pin connector on one end plugs into the handle, and a DC connector on the other end connects to the camera.

Tilta HDMI Extension Cable for Tiltaing Camera Cages

This HDMI Extension Cable from Tilta is primarily designed to connect to your camera inside your Tiltaing cage, providing you with an ergonomic method of wiring your camera to an external HDMI monitor. Simply plug the male HDMI end into the camera, and connect your display s HDMI cable to the female port of this extension cable. It is also compatible with Tilta s HDMI cable clamps for security.

Tilta Tiltaing Side Focus Handle Type I (F570, Tilta Gray)

Pair the versatile Tiltaing Side Focus Handle Type I from Tilta with a Nucleus Nano motor for fingertip focus control and with a Nucleus Nano R/S cable for a record start/stop button with compatible cameras. Powered by a separately available F570 L-series type battery, this Tilta gray handle slides onto the base of a half or full Tiltaing camera cage.

This cage component features a knurled focus wheel, an 8V micro-USB output, a 12V output, and a rubberized surface for a secure grip.

Tilta Tiltaing 15mm LWS Baseplate Type II (Black)

EAN: 614234707231

This black Tiltaing 15mm LWS Baseplate Type II from Tilta features two mounting surfaces. The top of the baseplate allows for mounting of Tiltaing half and full camera cages for Panasonic GH5 series, Fuji XT3/4, Nikon Z6/Z7, and Sony a6/a7/a9 cameras. The bottom of the baseplate mounts on Tilta standard dovetails. The bottom also incorporates three 1/4 -20 threaded holes for mounting the baseplate directly on a tripod. Built into the baseplate is a pair of LWS 15mm rod clamps with spring-loaded locking levers.

Compatibility

Tiltaing half and full camera cages for:

• Panasonic GH series
• Fuji XT3/4
• Nikon Z6/Z7
• Sony a6/a7/a9

Tilta Manfrotto Quick Release Plate for Tiltaing Camera Cages (Black)

EAN: 614234707019

Custom build your Tiltaing camera rig with this Manfrotto-compatible Quick Release Plate from Tilta. Attach this black plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from a Manfrotto 577, 500, or 701 support system.

Not compatible with the Tiltaing BMPCC 4K/6K cage.

Compatibility

Most Tiltaing camera cages
Manfrotto 577, 500, 701 support systems

Tilta Arca-Swiss Quick Release Plate for Tiltaing Camera Cages (Black)

EAN: 614234707026

Custom build your Tiltaing camera rig with this Arca-Swiss–compatible Quick Release Plate from Tilta. Attach this black plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from an Arca Swiss support system.

Not compatible with the Tiltaing BMPCC 4K/6K cage.

Compatibility

Most Tiltaing camera cages
Arca-Swiss support systems

Tilta HDMI Cable Clamp for Panasonic GH Series Cages (Black)

EAN: 614234707040

This black HDMI Clamp for Panasonic GH Series Cages from Tilta secures against both accidental HDMI cable disconnection and port damage to your GH series camera. Made from an aluminum alloy and stainless steel, this clamp includes mounting screws.

Compatibility

Tilta cages for Panasonic GH series cameras

Tilta HDMI and Run/Stop Cable Clamp for Panasonic GH Series (Black)

Secure your Panasonic GH series camera cables with the black HDMI and Run/Stop Cable Clamp from Tilta when your camera is mounted in the Tiltaing GH Series camera cage. Attach this aluminum clamp securely to the cage using the included screws, thread the HDMI and run/stop cables through, and then fasten the clamp thumbscrew to prevent accidental cable pulls or disconnects.

Compatibility

Tiltaing camera cage for Panasonic DMC-GH4, GH5, or GH5S