Tilta Tiltaing Sony a7/a9 Series Kit C (Tilta Gray)

Protecting your camera while improving its ergonomics and accessory mounting capabilities is the name of the game for the Tiltaing Sony a7/a9 Series Kit C with a Tilta gray finish. It includes an easily assembled formfitting cage, a hand strap, a quick release top handle, Manfrotto- and Arca-compatible quick release plates, a micro-HDMI to HDMI cable and cable clamp, and two bottom plates that allow you to use the kit with the a7/a7S as well as a7S II/a7R II/a7R III cameras. The kit provides a protective cage for your camera that incorporates twenty-six 1/4" -20 threaded accessory mounting holes.

The included powered side handle accepts an F570 L-series battery and mounts on the cage, allowing you to interface with and power the Nucleus Nano motor. The top handle mounts on the cage via one of the cage s two cold shoes, and it features multiple 1/4" -20 threaded mounting holes as well as a 15mm rod clamp and cold shoe. The Manfrotto- and Arca-compatible quick release plates provide expanded mounting possibilities, and the two bottom plates allow any of the a7 series cameras, as well as the a9, to be used with this system. The included run/stop cables and cable clamp attachments provide flexibility to use the Nucleus-Nano (not included) with your camera. Also included are a baseplate with LWS 15mm rod clamps and a pair of 15mm support rods.

Tilta Full Camera Cage for Sony a7/a9 Series (Tilta Gray)

Featuring a Tilta Gray finish, the Tilta Full Camera Cage for Sony a7/a9 Series is an easily assembled formfitting cage that holds your camera securely and features multiple 1/4" -20 threaded mounting holes for accessories. Two cold shoes also allow the mounting of accessories, providing a sturdy frame that won t stress your camera s body. The bottom plate features multiple mounting holes for attaching to a tripod or gimbal. The multiple holes allow you to fine-tune the position of your camera on your gimbal for more balancing options.

This formfitting aluminum and stainless steel cage comes disassembled, and you assemble it

Multiple 1/4" -20 and 3/8" -16 threaded mounting holes for accessory mounting

Two cold shoes are integrated into the cage for mounting accessories such as the optional top handle

A raised front plate prevents your camera from twisting in the cage

Two camera strap slots allow you to attach the included hand strap

The front plate has two mounting holes for optional lens adapter supports

The front plate and rubber pads on the cage s mounting surface help prevent your camera from twisting in the cage

EAN: 631384549818

Tilta HDMI and Run/Stop Cable Clamp Attachment for Sony a7 and a7S Cage (Tilta Gray)

Secure your Sony a7 and a7S camera cables with this HDMI and Run/Stop Cable Clamp Attachment from Tilta when your camera is mounted in the Tiltaing Sony a7 and a7S camera cage. The aluminum clamp attaches to the cage using the included screws, the HDMI and run/stop cables are threaded through, and then the clamp is tightened with a thumbscrew to prevent cable pulls or disconnects.

Compatibility

Tiltaing camera cage for Sony a7 and a7S cameras
HDMI and run/stop cables

EAN: 631384549931

Tilta HDMI Cable Clamp Attachment for Sony a7R III Cage (Tilta Gray)

Secure your Sony a7R III camera cables with this HDMI Cable Clamp Attachment from Tilta when your camera is mounted in the Tiltaing Sony a7R III camera cage. The aluminum clamp attaches to the cage using the included screws, the HDMI cable is threaded through, and then the clamp is tightened with a thumbscrew to prevent cable pulls or disconnects.

Compatibility

Tiltaing camera cage for Sony a7R III cameras
HDMI cable

EAN: 631384549917

Tilta HDMI Cable Clamp Attachment for Sony a7 and a9 Cage (Tilta Gray)

Secure your Sony a7 and a9 camera cables with this Tilta gray HDMI Cable Clamp Attachment from Tilta when your camera is mounted on the Tiltaing Sony a7 and a9 camera cage. The aluminum clamp attaches to the cage using the included screws, the HDMI cable is threaded through, and then the clamp is tightened with a thumbscrew to prevent cable pulls or disconnects.

Note:

Works with all a7/a9 series cameras except for the Sony a7R III.

Compatibility

Tiltaing camera cage for Sony a7 and a9 cameras (except for the Sony a7R III)
HDMI cable

EAN: 631384549894

Tilta Run/Stop Cable Clamp Attachment for Sony a7R III Cage (Tilta Gray)

Secure your Sony a7R III camera cables with this Run/Stop Cable Clamp Attachment from Tilta when your camera is mounted in the Tiltaing Sony a7R III camera cage. The aluminum clamp attaches to the cage using the included screw, the run/stop cable is threaded through, and then the clamp is tightened with a thumbscrew to prevent cable pulls or disconnects.

Compatibility

Tiltaing camera cage for Sony a7R III cameras
Run/stop cable

EAN: 631384549900

Tilta HDMI and Run/Stop Cable Clamp Attachment for Sony a9 Cage (Tilta Gray)

Secure your Sony a9 camera cables with this HDMI and Run/Stop Cable Clamp Attachment from Tilta when your camera is mounted in the Tiltaing Sony a9 camera cage. The aluminum clamp attaches to the cage using the included screw, the HDMI and run/stop cables are threaded through, and then the clamp is tightened with a thumbscrew to prevent cable pulls or disconnects.

Compatibility

Tiltaing camera cage for Sony a9 cameras
HDMI and run/stop cables

EAN: 631384549924

Tilta Quick Release Top Handle (Black)

This Tilta Quick Release Top Handle, in black, is a durable, sculpted top handle that attaches securely to a cold shoe and provides accessory mounting points, in addition to a top handle grip for your camera. The quick release handle s features include two cold shoe mounts, one in the front with a spring-loaded safety latch and the second on the back. The handle also features a 15mm rod port and multiple 1/4" -20 and 3/8" -16 threads with and without anti-twist divots.

The aluminum and stainless steel handle attaches to your camera or cage using the included spring-loaded thumbscrew. The 15mm rod port features a locking lever to secure the rod in place. On the front face of the handle, there is a 1/4" -20 threaded mounting hole with anti-twist divots. Multiple 1/4" -20 and 3/8" -16 threaded mounting holes are machined into the top and sides of the handle.

EAN: 631384551422

Tilta Arca-Swiss Quick Release Plate for Tiltaing Camera Cages (Tilta Gray)

Custom build your Tiltaing camera rig with this Arca-Swisscompatible Quick Release Plate from Tilta. Attach this Tilta gray plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from an Arca Swiss support system.

Note:

Not compatible with the Tiltaing BMPCC 4K/6K cage.

Compatibility

Most Tiltaing camera cages
Arca-Swiss support systems

Note:

Not compatible with the Tiltaing BMPCC 4K/6K cage

EAN: 631384550005

Tilta Manfrotto Quick Release Plate for Tiltaing Camera Cages (Tilta Gray)

Custom build your Tiltaing camera rig with this Manfrotto-compatible Quick Release Plate from Tilta. Attach this Tilta gray plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from a Manfrotto 577, 500, or 701 support system.

Note:

Not compatible with the Tiltaing BMPCC 4K/6K cage.

Compatibility

Most Tiltaing camera cages
Manfrotto 577, 500, 701 support systems

Note:

Not compatible with the Tiltaing BMPCC 4K/6K cage

EAN: 631384550012

Tilta Tiltaing Side Focus Handle Type III (NP-F570, Tilta Gray)

Pair the versatile Tiltaing Side Focus Handle Type III from Tilta with a Nucleus Nano motor for fingertip focus control and w