Wooden Camera 15mm Rod Clamp
The Wooden Camera 15mm Rod Clamp attaches to 15mm rods to add 1/4" -20 screw-holes to your camera rig. Among the variety of accessories that can be mounted to these screw-holes is Wooden Camera s QB Battery Back Plate. This plate comes in different versions, each designed to have a different type of battery plate and ultimately battery attached to it. With these attached, the QB Battery Back Plate can be mounted right onto the screw-holes of the Rod Clamp. The ability to attach so is especially useful when you have no way of mounting a battery directly onto your camera and as an alternative are looking for a way to get the battery near the camera (so you can connect the two).
EAN: 610079106260
Wooden Camera Battery Slide
The Battery Slide from Wooden Camera is an adjustable mounting system for V-Mount, Gold Mount, QRC Gold Mount, and RED/BLUESHAPE battery plates. Multiple rows of pass-through holes allow the attachment of rod clamps, cheese plates, and other accessories.
In order to adjust the plate s position, the user only needs to apply firm pressure to tilt it into place. Sliding the plate into position is facilitated by an adjustable thumbscrew. Both these movements make the plate ideal for adjusting counterbalance and transitioning from studio to handheld position.
EAN: 610079106451
Wooden Camera Unified DSLR Cage (Small) Specs
| Support Type | Cage, Handheld Support |
| Grip Type | Topside Handgrip |
| Camera Compatibility | Universal Height: 4" / 10.2 cm |
Mounting
| Rod Standard | 15 mm Single Rod |
| Included Rods | Yes |
| Accessory Mounting | Top Handle: Multiple x 1/4"-20 Thread, Multiple x 3/8"-16 Thread Cage, Top: 34 x 1/4"-20 Thread, 2 x Anti-Twist 3/8"-16 Thread Cage, Sides: Multiple x 1/4"-20 Thread, Multiple x 3/8"-16 Thread |
| Camera Mounting | 1/4"-20 Screw |
| Rod Ports | Baseplate: 2 x 15 mm Rod Port |
| Shoe Mounting | Top Handle, Top: 1 x Cold Shoe |
| Rosettes | None |
General
| Dimensions | 8.5 x 6 x 4.5" / 21.6 x 15.2 x 11.4 cm |
| Weight | 1 lb / 454 g |
Packaging Info
| Package Weight | 1.265 lb |
| Box Dimensions (LxWxH) | 8 x 7.05 x 2.5" |
Wooden Camera Unified DSLR 15mm Baseplate Specs
| Support Type | Baseplate |
| Grip Type | None |
| Camera Compatibility | Universal |
Mounting
| Rod Standard | 15 mm LWS / 60 mm Spacing |
| Accessory Mounting | Sides: 8 x 1/4"-20 Thread, 1 x 3/8"-16 Thread |
| Camera Mounting | 1/4"-20 Screw |
| Rosettes | None |
General
| Dimensions | 5.5 x 4.5 x 1.5" / 140 x 114 x 38 mm |
| Weight | 0.5 lb / 202 g |
Packaging Info
| Package Weight | 0.665 lb |
| Box Dimensions (LxWxH) | 4.55 x 2.65 x 1.8" |
Wooden Camera 15mm Support Rod (15") Specs
| Rod Size | 15 mm |
| Rod Length | 15" (38 cm) |
Packaging Info
| Package Weight | 0.45 lb |
| Box Dimensions (LxWxH) | 15.7 x 1.25 x 0.75" |
Wooden Camera Safety Dovetail Plate (12") Specs
| Dimensions | 12.0 x 2.7 x 0.5" / 30.5 x 6.8 x 1.3 cm |
| Weight | 0.9 lb / 0.4 kg |
Packaging Info
| Package Weight | 0.95 lb |
| Box Dimensions (LxWxH) | 12.2 x 3.6 x 0.5" |
Wooden Camera A-Box for DSLR Cameras Specs
| Input | 2 x XLR 3-pin (female) |
| Connector | 3.5 mm stereo mini-jack (male) |
| Dimensions | 3 x 3 x 7" (7.6 x 7.6 x 17.8 cm) |
| Weight | 12.8 oz (362.87 g) |
Packaging Info
| Package Weight | 0.685 lb |
| Box Dimensions (LxWxH) | 6.8 x 4.25 x 3.3" |
Wooden Camera Ultra Arm Monitor Mount (1/4"-20 to 1/4"-20, 3" Extension) Specs
| Top Mount | 1/4"-20 Male |
| Bottom Mount | 1/4"-20 Male |
| Points of Articulation | 4 |
| Maximum Length | 9.5" / 24.1 cm |
| Weight | 11.22 oz / 318 g |
Packaging Info
| Package Weight | 0.71 lb |
| Box Dimensions (LxWxH) | 6.95 x 2.75 x 2.2" |
Wooden Camera 15mm Rod Clamp Specs
| Dimensions | 4.4 x 1 x .6" (11 x 2.5 x 1.5 cm) |
| Weight | .2 lbs (91 g) |
Packaging Info
| Package Weight | 0.2 lb |
| Box Dimensions (LxWxH) | 3 x 1.95 x 1" |
Wooden Camera Battery Slide Specs
| Dimensions | 6.0 x 4.5 x 1.8" (152.4 x 114.3 x 45.7 mm) |
| Weight | 8 oz (226.8 g) |
In the Box
- 2 x Low-Profile 1/4"-20 Screws
- 3 x 1/4"-20 Threaded Support Posts
- 2-Year Manufacturer Warranty
- 4 x 1/4"-20 Socket Cap Screws
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- 1/4-20 x 3/8" Screw
- Bolt-On 19mm Rod
- 15mm Adapter Bushing
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- 2 x 1/4"-20 x 1/4" Screws
- 2 x 1/4"-20 x 3/4" Screws
- 2-Year Manufacturer Warranty
- 2 x 1/4"-20 x 1/4" Socket Cap Screw
- 6 x M3 x 14mm Pan Head Screws
- 4 x M3 x 12mm Pan Head Screws
- 4 x M3 x 8mm Pan Head Screws
- 4 x M3 x 8mm Phillips Flat Head Screws
- 2-Year Manufacturer Warranty
No posts found
