Bright Tangerine Split Riser for 15mm LeftField 3 Baseplate and Sony Rialto/Rialto 2

Bright Tangerine B4004.1033 Overview

This Split Riser from Bright Tangerine has upper and riser plates that attach to your Sony Rialto or Rialto 2 and integrate the unit with a compatible 15mm LWS baseplate. Simply adjust the position of your Rialto on the plate for optimal balance before tightening the included screws. The upper plate secures directly to the bottom of the unit and can be used independently from the riser in gimbal applications for a low-profile form factor.

Threads on either side of the upper plate allow you to integrate Bright Tangerine left and right side plates and form a rigid camera cage. The split riser is also dovetail and quick release compatible for easy transitioning from handheld to stabilized shooting.

Gimbal Ready

For gimbal and Steadicam work, the camera can be quickly detached from the baseplate providing a low profile form factor, ready to be connected to dovetails and other quick release plates with a stable 75mm wide base. By removing the baseplate, it lowers the center of gravity and reduces the overall weight of the build.

Combines with Side and Top Plates

The upper plate provides mounting points for B4004.1031 and B4004.1032 Side Plates. Combined with the B4004.1030 Sliding Top Plate, they form a rigid cage around the camera.

Perfect Alignment

Locating holes on the bottom of the upper plate, match up with the pins on the riser ensuring perfect alignment and consistency when reattaching the baseplate.

Assembly

To install the split riser, you will need a flathead screwdriver and a 4mm hex key. First, connect the riser plate to the baseplate cores using the six M4 screws with the 4mm hex wrench. Next, attach the upper plate to the base of the Rialto unit with the two short 3/8" -16 screws using a 4mm hex wrench. You can now align the upper plate to the riser, using the locating pins and securing with the two extended 3/8" -16 screws with the flathead screwdriver.