Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Cartoni P-900 P-90 Pedestal with Flat Base Adapter
The Cartoni P-900 Pedestal System is the P-90 pedestal with a flat base adapter. This system is compact and portable, yet it will work with a 198 lbs camera, lens and teleprompter combination.
Flat Base
This system comes with a flat base adapter for heads that utilize flat base attachment.
On-Shot Stroke
The two stage column enables an on-shot stroke 77mm with one smooth and precise movement of the camera operator. The column works with compressed air and can be serviced with a hand pump.
Dolly
The dolly is equipped with double wheels interlocked by a chain operating accurate synchronous travel and steering.
Crab Position
The crab position capability allows for movement through narrow doorways.
Cartoni Master 30 Flat Base Fluid Head
In broadcast and studio configurations, the Master 30 Flat Base Fluid Head from Cartoni covers the needs of video shooters using cameras weighing from 7 to 66 lb. With a low center of gravity configuration such as with teleprompter, the Master 30 can hold cameras as heavy as 88 lb. The fluid module, in both pan and tilt modes, ensures smooth movements. With accurate starts and stops, the drag system allows a wide variety from almost freewheeling in fast action movements to maximum resistance for long focal shoots.
Counterbalance performs perfect balance at any angle from 0 to ± 90° &
Operating knobs and levers are conveniently located and easy to reach with a special care for ergonomics
Head comes equipped with dual telescopic pan bars, illuminated spirit level and digital readouts for drag control and counterbalance settings
The Cartoni P-900 Pedestal System is the P-90 pedestal with a flat base adapter. This system is compact and portable, yet it will work with a 198 lbs camera, lens and teleprompter combination.
Flat Base
This system comes with a flat base adapter for heads that utilize flat base attachment.
On-Shot Stroke
The two stage column enables an on-shot stroke 77mm with one smooth and precise movement of the camera operator. The column works with compressed air and can be serviced with a hand pump.
Dolly
The dolly is equipped with double wheels interlocked by a chain operating accurate synchronous travel and steering.
Crab Position
The crab position capability allows for movement through narrow doorways.
Cartoni Master 30 Flat Base Fluid Head
In broadcast and studio configurations, the Master 30 Flat Base Fluid Head from Cartoni covers the needs of video shooters using cameras weighing from 7 to 66 lb. With a low center of gravity configuration such as with teleprompter, the Master 30 can hold cameras as heavy as 88 lb. The fluid module, in both pan and tilt modes, ensures smooth movements. With accurate starts and stops, the drag system allows a wide variety from almost freewheeling in fast action movements to maximum resistance for long focal shoots.
Counterbalance performs perfect balance at any angle from 0 to ± 90° &
Operating knobs and levers are conveniently located and easy to reach with a special care for ergonomics
Head comes equipped with dual telescopic pan bars, illuminated spirit level and digital readouts for drag control and counterbalance settings
Cartoni P-900 P-90 Pedestal with Flat Base Adapter Specs
General | |
Load Capacity | 198 lbs 90 kg |
Trim Ring | No |
Bowl Diameter/Thread | Flat Base Adapter |
Steering Ring Diameter | 22.6" 57.5cm |
Folded/Transport Length | Not Specified by Manufacturer |
Minimum Height | 25.9" 66cm |
Maximum Height | 56.2" 143cm |
Weight | 110 lbs 50 kg |
Post | |
Stages | 2 Stages |
On-Shot Stroke | 30.3" 77cm |
Dolly | |
Doorway Tracking Width | 31.4" 80cm |
Transit Doorway Width | 31.4" 80cm |
Narrow Doorway Width | 31.4" 80cm |
Wheel Diameter | 49.2" 125cm |
Wheel Lock | Yes |
Cable Guards | Yes |
Cartoni Master 30 Flat Base Fluid Head Specs
Camera Plate
Camera Plate Features | Sliding Balance Plate |
Head
Base Mount | 4-Bolt Flat Base |
Counter Balance | Continuous |
Pan & Tilt
Drag Control | Continuous |
Drag Type | Fluid |
Vertical Tilt | +90° to -90° |
Panning Range | 360° |
General
Load Capacity | 7 to 66 lb / 3 to 30 kg |
Operating Temperature | -40 to 140°F / -40 to 60°C |
Weight | 23.1 lb / 10.5 kg |
In the Box
- P-90 Pedestal
- Flat Base Adapter
- 5-Year Manufacturer Warranty
- 3-Year Warranty
- 5-Year Warranty on Registration with Cartoni within 2 Year of Purchase
No posts found