Raise and lower your mounted camera of choice with this LX-ePed Electric Pedestal Column with Ground Spreader from Libec thanks to its handheld controller and working height range of 37.5 to 97.2" . Mount a camcorder, PTZ, or other recording device on the tripod using the 1/4" -20 and 3/8" -16 screws on its 100mm ball head and 22 lb load capacity.
LAN ports on both the pedestal column and controller unit allow the devices to communicate with one another. The elevation rocker on the controller allows for the intuitive raising and lowering of the tripod s center column. The included ground spreader provides additional security to the system, and an AC/DC power adapter provides power.
Libec LX-ePed Specs
General
| Load Capacity | 22 lb / 10 kg |
| Leg Sections | 2 |
| Minimum Height | 37.5" / 95.3 cm |
| Maximum Height | 97.2" / 247 cm |
| Bubble Level | Yes |
Inputs / Outputs
| Input and Output Connectors | 1 x RJ45 LAN Control Input 1 x RJ45 LAN Control Output 1 x DC Barrel Power Input |
Power
| Power Source | AC Adapter with Power Brick |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Speed | 14 to 40 Seconds |
| Run Time | 3 Minutes (Continuous) |
Environmental
| Environmental Protection | None |
| Operating Temperature | 14 to 104°F / -10 to 40°C |
| Operating Humidity | 90% |
Physical
| Mounting | 1 x 1/4"-20 Screw 1 x 3/8"-16 Screw 2 x 1/4"-20 Thread 2 x 3/8"-16 Screw 1 x 100mm Bowl |
| Color | Black |
| Cable Length | 98.4` / 30 m (LAN) 9.8` / 3 m (AC/DC Power) |
| Dimensions | 39.6 x 9.5" / 1005 x 241 mm (Folded) 28 x 24.4" / 710 x 620 mm (Ground Spreader Width) 1.3` / 400 mm (Elevation) 5 x 1.6 x 1.4" / 128 x 40 x 36 mm (Controller) |
| Weight | 24.7 lb / 11.2 kg (Excluding Controller and Power Adapter) 22.7 lb / 10.3 kg (Column Only) |
Packaging Info
| Package Weight | 38 lb |
| Box Dimensions (LxWxH) | 48.5 x 13.25 x 12.75" |
In the Box
- Libec LX-ePed Electric Pedestal Column with Ground Spreader
- Controller with Elevation Rocker
- AC/DC Adapter Cable (9.8`)
- LAN Cable (98.4`)
- 3-Year Manufacturer Warranty
No posts found
