The PED 50 Pneumatic Video Pedestal from OZEN supports loads up to 110 lb and is compatible with separately available 100mm ball, 150mm ball, and flat base heads. Easy to assemble and break down, the PED 50 is suitable for both studio and remote productions.
This pedestal ranges from 31.5 to 61.4 in total height and features a maximum center column rise (on-shot stroke) of 15.4 . For safety, the center column features both a pressure-relief valve and air pump refilling. A heavy-duty dolly with arc-tracking wheels and cable guards forms the base of the PED 50 system.
Versatile Head Base
Compatible with 100mm ball, 150mm ball, and flat base heads
Payload Capacity
Supports medium to heavy weight rigs up to 110 lb
On-Shot Stroke
Can be lifted a maximum of 15.4 in one motion for smooth vertical adjustments
Height Range
31.5 to 61.4 total height range
Pneumatic Column
Pressure-relief valve and air pump refilling for safety
Portable
Assembles and breaks down easily for location shoots
Heavy-Duty Dolly
Locking, arc-tracking wheels with cable guards
OZEN Agile 20 Fluid Head
Smooth your pans and tilts with the Agile 20 Fluid Head from OZEN. Designed for fast setup in ENG- and EFP-style shooting scenarios, the Agile 20 is equipped with a CNC-machined dial mechanism for crisp, repeatable counterbalance adjustment in 16 steps. The Agile 20 s versatile design enables you to quickly change camcorder configurations within a payload range of 8.8 to 61.6 pounds.
The Agile 20 is equipped with a 9/9 + 0 fluid drag mechanism and offers a tilt range of 90 to -80° & . The considerable amount of fluid drag available at higher increments enables experienced operators to acquire full-zoom, pan/tilt-intensive images that are indistinguishable from those acquired in close. This fluid head uses the full-sized E-Z Load camera mounting interface, which is compatible with the industry-standard spring-loaded, capture-type interface and fits the pace of shoot & scoot workflows.
Ergonomic pan/tilt fluid drag and counterbalance controls
Distinguishable, 90° & opposed pan and tilt brakes
Replaceable pan bar rosettes for longer fluid head usability
Illuminated bubble level
Constructed of CNC-machined and anodized aluminum with stainless steel fasteners
Two telescopic pan bars included
OZEN PED 50 Pneumatic Video Pedestal Kit with Dolly Specs
General
| Load Capacity | 110 lb / 50 kg |
| Bowl Diameter/Thread | 100, 150 mm |
| Steering Ring Diameter | Not Specified by Manufacturer |
| Minimum Height | 31.5" / 80 cm |
| Maximum Height | 61.4" / 156 cm |
| Folded/Transport Length | Not Specified by Manufacturer |
| Weight | 41.7 lb / 18.9 kg |
Center Column
| Stages | 1 |
| On-Shot Stroke | 15.4" / 39 cm |
Dolly
| Doorway Tracking Width | Not Specified by Manufacturer |
| Wheel Diameter | Not Specified by Manufacturer |
OZEN Agile 20 Fluid Head Specs
Camera Plate
| Camera Mounting Screw | Not Specified by Manufacturer |
Head
| Base Mount | 100 mm Half Ball |
| Counter Balance | Incremental 16-Step |
| Pan Handle Fittings | 2 x Rosette |
| Bubble Level | 1 x Illuminated |
Pan & Tilt
| Drag Control | Pan: Stepped 9-Step Plus 0 Tilt: Stepped 9-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -80° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
General
| Load Capacity | 8.8 to 61.6 lb / 3.99 to 27.94 kg |
| Operating Temperature | -40 to 140°F / -40 to 60°C |
| Weight | 13.1 lb / 5.94 kg |
In the Box
- Wheeled Dolly
- 2-Year Warranty
- 4-Year Total Warranty with Registration
- Camera Plate
- 2 x Telescopic Pan Bars
- Spare Camera Plate Screws
- 2-Year Warranty; Extendable to 4 Years with Product Registration
No posts found
