Sachtler System 60 Vario 2-80 (30.3' On-Shot Stroke)

Supporting cameras and prompters weighing up to 143 lb, the System 60 Vario 2-80 from Sachtler allows a single camera operator to rapidly change camera positions and make camera moves on smooth interior and exterior surfaces. Designed to provide a comfortable eyeline for both seated and standing subjects, the system has a height range of 35 to 65.4" with an extremely smooth height adjustment of 30.3" within the shot, powered by a pressurized air system. Safely move the pedestal system over the floor in either standard or crab steering mode, and the wheel s cable guards help protect you from accidentally rolling over cables.

Sachtler Video 60 Plus Studio Fluid Head (Flat Base) - Supports 35-145 lbs

The Video 60 Plus with a weight of 8.4 kg /18.5 lb is extremely lightweight for an EFP fluid head. Even the flat base OB and studio model is only 9.4 kg / 21 lb. With a 150mm / 5.9" center of gravity height, it easily supports weights up to 65 kg /145 lb. Due to it s ergonomic, robust, squeeze-proof design, which ensures safe operation in any position.

The Video 60 Plus displays an 18 step counterbalance which can be adjusted easily and safely in 9 stages with the well known Sachtler dial. Fine-tuning is achieved via a half step function, which can either be engaged or disengaged. And for even more precise adjustment the balance plate has a sliding range of up to 115mm / 4.5" , and up to 120mm / 4.7" for the studio version. This allows you to safely balance the camera at any tilt angle.

The Video 60 Plus fluid head has a modular design, allowing you to change it for different applications. Various configuration options are available like 150mm Ball Base with the Touch & Go quick release system and camera plate 35 wedge or Flat Base with the V-shaped wedge plate, or you can even mount it on a Mitchell Mount base.

Frictionless leak proof fluid damping with Nine levels of drag

A prerequisite for perfect pictures is a panning movement without jerks and vibrations. Sachtler s patented damping system takes everything is stride. The individual modules are frictionless and contain no hydraulic oil. This means they are permanently leak proof. The damping action of heads is identical across both horizontal and vertical planes and offers you nine steps of drag, for smooth camerawork under the toughest of rough conditions. You can completely disengage the drag for fast panning without affecting the dynamic counterbalance system.

Touch & Go Quick Release / Automatic Locking System

Stop wasting time by fumbling around with clumsy attachments, or bother screwing the camera to head and then having to unscrew it again. With the Touch & Go system invented by Sachtler, the camera plate is secured to the camera, while the mating balance plate is mounted on the fluid head.
All you need to do is slip the camera into position, engage the mechanism, and the camera is locked firmly in place, when finished just disengage the latch and go. When you set up the camera for the next shot you still have all the original settings. Also features a safety lock lever that prevents inadvertent disengagement of the camera latch.

Sliding Balance Plate

The sliding camera mount and plate with a 4.5-inch (150mm Ball Base) or 4.7-inch (Flatbase) sliding range, allows you to compensates precisely for a variety of configuration weights. Ensuring perfect balance across the horizontal plane. Most importantly, once adjusted, the settings cannot be lost.

18 Step dynamic counterbalancing system

Built with torsion springs the dynamic counterbalancing system compensates for torques as the camera tilts, preventing the camera from inadvertently tipping, and ensuring that it is positioned securely at any tilt angle. Freeing you to concentrate fully on your camerawork. Its 18-step counterbalance allows adjustments via dial, in 9 stages and fine tune by half step function, and can be activated and deactivated individually. Independent from the damping system, they work silently and without the need for maintenance.

Safe at any temperature

Pressure or temperature does not influence the damping system, it has an operating range from
-40° F to +140° F, and works without friction. Shoot wherever you want, from torrid heat to cold climates.

Vibrationless vertical / horizontal brakes, for maximum safety in fast-paced reporting situations.

Built-in illuminated bubble for horizontal leveling, uses a conventional battery and ensures easy leveling even under unfavorable lighting conditions.

Load capacity of: 132 lb.

Sachtler Vario Ped 2-80

For smooth single-operator camera moves, crab or standard steering, or 30.3" in-shot height adjustment, the Sachtler Vario Ped 2-80 is your go-to camera support for cameras and rigs weighing up to 176 lb. Suitable for use on smooth surfaces and the studio floor, the pedestal can be used as support on exteriors and interiors. With its air inlet valve and an optional manual pump or compressed air tank, you can even use the pedestal in remote locations where power can be difficult to source.

Grab the included steering ring to move the pedestal from position to position for rapid camera placement, or change the height throughout the 30.3" range. The pedestal supports both standard steering and crab movement, allowing you to create smooth tracking and dolly moves. Featuring two Perfect Balance stages, the entire 30.3" height range has smooth vertical adjustment for in-shot camera moves. Narrow width allows you to move among tight spaces as well as through most doorways. The air inlet valve allows you to use an external pump to charge the pedestal, and the integrated pressure gauge lets you see the pressure remaining at a glance. The removable pedestal dolly has 5" wheels and cable guards to help prevent you from rolling over a cable ruining the shot, and it is removable for easier transport and storage.

General

Supporting up to 176 lb, with almost effortless adjustments and precise steering, the Vario Ped 2-80 can be used to work with some of the heaviest cameras, lenses, and combinations of teleprompters to work in virtually any production from an intimate interview to an outside broadcast environment. Smooth and silent with exact direction control allows solo operators the freedom to position their cameras perfectly with ease.

Balanced Operation

Calibrated and perfectly balanced to counter gravity, the 2-80 Vario pedestal allows operators to lift and lower mounted cameras, teleprompters, and other accessories. Ergonomically positioned controls reduce strain on your body for more comfort during long periods of use.

Height

The 30.3" height adjustment range makes it quick and easy to select the right camera height when filming seated or standing subjects.

Perfect Balance Stage

Featuring two Perfect Balance stages, you can smoothly adjust the height of the pedestal through a 30.3" range while shooting without stops or bumps when adjusting the height. This allows the operator to create vertical camera movement without distracting the audience or to move from a seated to a standing position without jarring the camera.

Column Locks

Integrated column locks prevent the column height from shifting during moves.

Steering

The Vario Ped 2-80 and its included pedestal dolly support both standard and crab steering for smooth tracking moves without laying track, as well as free camera movement and positioning.

Wheels and Cable Guards

The 5" wheels with integrated cable guards help provide smooth camera moves while the cable guards help prevent you from rolling over unattended cables, which can lead to jarring camera moves, needing to rebalance your camera setup, or damaged cables and gear.

Air Pressure

The 2-80 has an air inlet valve that lets you use optional pumps or a compressed air cylinder (not included) to replenish the pedest