Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Acebil CH7(F) Fluid Head (100mm Ball)
Designed for use with 100mm bowl tripods, the Acebil CH7(F) Fluid Head features a 100mm ball design and supports loads up to 33 lb. An 8-step counterbalance allows you to compensate for the weight of your rig for better balancing, while independent 6-step pan and tilt drag settings provide adjustable resistance for precise movements. A sliding quick release plate attaches to your camera via a 1/4 -20 or 3/8 -16 screw, for easy attachment and removal. To assist in keeping your shots level, even in dim environments, the head has a built-in LED illuminated bubble level. A pan bar comes included and can be attached on either the left or right side of the head.
Key Features
Acebil T1002CG Carbon Fiber Tripod with 100mm Bowl and Ground-Level Spreader
This lightweight, carbon fiber T1002CG Tripod with 100mm Bowl from Acebil is designed to mount camera rigs weighing up to 88 lb, and it features a 100mm bowl mount. The durable two-stage, three-section design allows you to adjust the height of the tripod from 17.7 to 60.2 , and its flip locks make it quick and easy to set up and break down. The included ground-level spreader and rubber feet add stability for heavier loads, and a soft carry case is included for storage and transport.
Used to mount cameras weighing up to 88 lb
Two-stage, three-section design facilitates height adjustment of the tripod from 17.7 to 60.2
Ground-level spreader and rubber feet stabilize the tripod legs firmly, providing enhanced stability that leads to better picture quality
Carbon fiber construction make the tripod lightweight and corrosion-resistant
A soft carry case is included for storage and transport
Designed for use with 100mm bowl tripods, the Acebil CH7(F) Fluid Head features a 100mm ball design and supports loads up to 33 lb. An 8-step counterbalance allows you to compensate for the weight of your rig for better balancing, while independent 6-step pan and tilt drag settings provide adjustable resistance for precise movements. A sliding quick release plate attaches to your camera via a 1/4 -20 or 3/8 -16 screw, for easy attachment and removal. To assist in keeping your shots level, even in dim environments, the head has a built-in LED illuminated bubble level. A pan bar comes included and can be attached on either the left or right side of the head.
Key Features
- Supports loads up to 33 lb
- 100mm ball
- 8-Step counterbalance
- Independent 6-step pan and tilt drag settings
- Tilt range: +90° / -70°
- Built-in LED illuminated bubble level
- Sliding quick release plate with 1/4 -20 and 3/8 -16 screws
- Included pan bar can be attached on left or right side of head
Acebil T1002CG Carbon Fiber Tripod with 100mm Bowl and Ground-Level Spreader
This lightweight, carbon fiber T1002CG Tripod with 100mm Bowl from Acebil is designed to mount camera rigs weighing up to 88 lb, and it features a 100mm bowl mount. The durable two-stage, three-section design allows you to adjust the height of the tripod from 17.7 to 60.2 , and its flip locks make it quick and easy to set up and break down. The included ground-level spreader and rubber feet add stability for heavier loads, and a soft carry case is included for storage and transport.
Used to mount cameras weighing up to 88 lb
Two-stage, three-section design facilitates height adjustment of the tripod from 17.7 to 60.2
Ground-level spreader and rubber feet stabilize the tripod legs firmly, providing enhanced stability that leads to better picture quality
Carbon fiber construction make the tripod lightweight and corrosion-resistant
A soft carry case is included for storage and transport
Acebil CH7(F) Fluid Head (100mm Ball) Specs
Camera Plate
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Mounting Screw | 1 x 1/4"-20 Male 1 x 3/8"-16 Male |
Head
| Base Mount | 100 mm Half Ball |
| Counter Balance | Incremental 8-Step Plus 0 |
| Bubble Level | 1 x Illuminated |
Pan & Tilt
| Drag Control | 6-Step Plus 0 |
| Vertical Tilt | +90° to -70° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
General
| Load Capacity | 33 lb / 14.97 kg |
| Weight | 7.5 lb / 3.4 kg |
Acebil T1002CG Carbon Fiber Tripod with 100mm Bowl and Ground-Level Spreader Specs
General
| Head Mount Type | 100 mm Bowl |
| Maximum Working Height | 60.2" / 153 cm (with Spreader) |
| Minimum Working Height | 17.7" / 45 cm |
| Closed Length | Not Specified by Manufacturer |
| Materials | Carbon Fiber |
| Weight | 7.9 lb / 3.6 kg |
Legs
| Leg Lock Type | Flip Lock |
| Independent Leg Spread | Yes |
| Leg Sections | 3 |
| Feet Features | Rubber |
| Spreader | Ground (Included) |
Packaging Info
| Package Weight | 12.6 lb |
| Box Dimensions (LxWxH) | 39.8 x 9 x 8.7" |
In the Box
- Pan Bar
- Quick Release Plate with 1/4"-20 and 3/8"-16 Screws
- 2-Year Manufacturer Warranty
- Acebil GS-3 Ground Spreader for T750/T752 Tripods
- Acebil S-52 Case for P-22, P-20, P-42 or P-52 Tripod
- 2-Year Manufacturer Warranty
No posts found
