Acebil CH7(F) Fluid Head (100mm Ball)
Designed for use with 100mm bowl tripods, the Acebil CH7(F) Fluid Head features a 100mm ball design and supports loads up to 33 lb. An 8-step counterbalance allows you to compensate for the weight of your rig for better balancing, while independent 6-step pan and tilt drag settings provide adjustable resistance for precise movements. A sliding quick release plate attaches to your camera via a 1/4 -20 or 3/8 -16 screw, for easy attachment and removal. To assist in keeping your shots level, even in dim environments, the head has a built-in LED illuminated bubble level. A pan bar comes included and can be attached on either the left or right side of the head.
Key Features
Acebil T1002CG Carbon Fiber Tripod with 100mm Bowl and Ground-Level Spreader
This lightweight, carbon fiber T1002CG Tripod with 100mm Bowl from Acebil is designed to mount camera rigs weighing up to 88 lb, and it features a 100mm bowl mount. The durable two-stage, three-section design allows you to adjust the height of the tripod from 17.7 to 60.2 , and its flip locks make it quick and easy to set up and break down. The included ground-level spreader and rubber feet add stability for heavier loads, and a soft carry case is included for storage and transport.
Used to mount cameras weighing up to 88 lb
Two-stage, three-section design facilitates height adjustment of the tripod from 17.7 to 60.2
Ground-level spreader and rubber feet stabilize the tripod legs firmly, providing enhanced stability that leads to better picture quality
Carbon fiber construction make the tripod lightweight and corrosion-resistant
A soft carry case is included for storage and transport
Designed for use with 100mm bowl tripods, the Acebil CH7(F) Fluid Head features a 100mm ball design and supports loads up to 33 lb. An 8-step counterbalance allows you to compensate for the weight of your rig for better balancing, while independent 6-step pan and tilt drag settings provide adjustable resistance for precise movements. A sliding quick release plate attaches to your camera via a 1/4 -20 or 3/8 -16 screw, for easy attachment and removal. To assist in keeping your shots level, even in dim environments, the head has a built-in LED illuminated bubble level. A pan bar comes included and can be attached on either the left or right side of the head.
Key Features
- Supports loads up to 33 lb
- 100mm ball
- 8-Step counterbalance
- Independent 6-step pan and tilt drag settings
- Tilt range: +90° / -70°
- Built-in LED illuminated bubble level
- Sliding quick release plate with 1/4 -20 and 3/8 -16 screws
- Included pan bar can be attached on left or right side of head
Acebil T1002CG Carbon Fiber Tripod with 100mm Bowl and Ground-Level Spreader
This lightweight, carbon fiber T1002CG Tripod with 100mm Bowl from Acebil is designed to mount camera rigs weighing up to 88 lb, and it features a 100mm bowl mount. The durable two-stage, three-section design allows you to adjust the height of the tripod from 17.7 to 60.2 , and its flip locks make it quick and easy to set up and break down. The included ground-level spreader and rubber feet add stability for heavier loads, and a soft carry case is included for storage and transport.
Used to mount cameras weighing up to 88 lb
Two-stage, three-section design facilitates height adjustment of the tripod from 17.7 to 60.2
Ground-level spreader and rubber feet stabilize the tripod legs firmly, providing enhanced stability that leads to better picture quality
Carbon fiber construction make the tripod lightweight and corrosion-resistant
A soft carry case is included for storage and transport
Acebil CH7(F) Fluid Head (100mm Ball) Specs
Camera Plate
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Mounting Screw | 1 x 1/4"-20 Male 1 x 3/8"-16 Male |
Head
| Base Mount | 100 mm Half Ball |
| Counter Balance | Incremental 8-Step Plus 0 |
| Bubble Level | 1 x Illuminated |
Pan & Tilt
| Drag Control | 6-Step Plus 0 |
| Vertical Tilt | +90° to -70° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
General
| Load Capacity | 33 lb / 14.97 kg |
| Weight | 7.5 lb / 3.4 kg |
Acebil T1002CG Carbon Fiber Tripod with 100mm Bowl and Ground-Level Spreader Specs
General
| Head Mount Type | 100 mm Bowl |
| Maximum Working Height | 60.2" / 153 cm (with Spreader) |
| Minimum Working Height | 17.7" / 45 cm |
| Closed Length | Not Specified by Manufacturer |
| Materials | Carbon Fiber |
| Weight | 7.9 lb / 3.6 kg |
Legs
| Leg Lock Type | Flip Lock |
| Independent Leg Spread | Yes |
| Leg Sections | 3 |
| Feet Features | Rubber |
| Spreader | Ground (Included) |
Packaging Info
| Package Weight | 12.6 lb |
| Box Dimensions (LxWxH) | 39.8 x 9 x 8.7" |
In the Box
- Pan Bar
- Quick Release Plate with 1/4"-20 and 3/8"-16 Screws
- 2-Year Manufacturer Warranty
- Acebil GS-3 Ground Spreader for T750/T752 Tripods
- Acebil S-52 Case for P-22, P-20, P-42 or P-52 Tripod
- 2-Year Manufacturer Warranty
No posts found
