Acebil T2002CG 100mm Ball Base Tripod with Ground-Level Spreader
The Acebil T2002CG 100mm Ball Base Tripod with Ground-Level Spreader is designed for a load capacity weighing up to 198 lb. A two-stage design allows you to adjust the height of the tripod from 21.7 - 62.6 . A ground-level spreader is included.
Used to mount cameras weighing up to 198 lb
Two-stage design
Ground-level spreader
Carbon fiber pipes make the tripod lightweight and corrosion-resistant
Acebil CH8(F) Fluid Head (100mm Ball)
The Acebil CH8(F) Fluid Head is a professional fluid video head designed to support cameras and accessories weighing up to 55 pounds, with a 100mm half ball for quick leveling. It features an 8-step counterbalance to adjust the head for use with loads ranging from 0 to 44 lb the counterbalance also has a zero setting. Pan and tilt are independently adjustable, and each has eight steps of drag, plus the zero setting for completely free movement, such as whip pans/tilts.
The head features a sliding baseplate for balancing your camera, and it has both a 1/4 -20 and 3/8 -16 tie-down screw. An illuminated bubble level helps you set the level of the head. The head also features two pan handle attachment rosettes, enabling you to mount the included pan handle onto either side of the head.
Features
The Acebil T2002CG 100mm Ball Base Tripod with Ground-Level Spreader is designed for a load capacity weighing up to 198 lb. A two-stage design allows you to adjust the height of the tripod from 21.7 - 62.6 . A ground-level spreader is included.
Used to mount cameras weighing up to 198 lb
Two-stage design
Ground-level spreader
Carbon fiber pipes make the tripod lightweight and corrosion-resistant
Acebil CH8(F) Fluid Head (100mm Ball)
The Acebil CH8(F) Fluid Head is a professional fluid video head designed to support cameras and accessories weighing up to 55 pounds, with a 100mm half ball for quick leveling. It features an 8-step counterbalance to adjust the head for use with loads ranging from 0 to 44 lb the counterbalance also has a zero setting. Pan and tilt are independently adjustable, and each has eight steps of drag, plus the zero setting for completely free movement, such as whip pans/tilts.
The head features a sliding baseplate for balancing your camera, and it has both a 1/4 -20 and 3/8 -16 tie-down screw. An illuminated bubble level helps you set the level of the head. The head also features two pan handle attachment rosettes, enabling you to mount the included pan handle onto either side of the head.
Features
- 100mm half ball
- 55 lb load capacity
- 8-step counterbalance supports loads from 0 to 44 lb
- Independent pan and tilt drag with 8 steps plus a zero setting
- Sliding quick release plate with 3/8 -16 and 1/4 -20 screws
- Bubble level with LED light
- Telescopic pan handle
Acebil T2002CG 100mm Ball Base Tripod with Ground-Level Spreader Specs
General
| Head Mount Type | 100 mm Bowl |
| Maximum Working Height | 62.6" / 159 cm |
| Minimum Working Height | 21.7" / 55 cm |
| Closed Length | Not Specified by Manufacturer |
| Materials | Carbon Fiber |
| Weight | 11.5 lb / 5.2 kg |
Legs
| Leg Sections | 3 |
Packaging Info
| Box Dimensions (LxWxH) | 48 x 12 x 12" |
Acebil CH8(F) Fluid Head (100mm Ball) Specs
Camera Plate
| Camera Plate Features | Sliding Balance Plate |
| Camera Mounting Screw | 1 x 1/4"-20 Male 1 x 3/8"-16 Male |
Head
| Base Mount | 100 mm Half Ball |
| Counter Balance | Incremental 8-Step Plus 0 (0 to 44 lb / 0 to 19.96 kg) |
| Pan Handle Fittings | 2 x Rosette |
| Bubble Level | 1 x Illuminated |
Pan & Tilt
| Drag Control | Pan: 8-Step Plus 0 Tilt: 8-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -70° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
General
| Load Capacity | 55 lb / 24.95 kg |
| Weight | 10.6 lb / 4.81 kg |
In the Box
- Acebil Ground Spreader for T2002C Tripod
- 2-Year Manufacturer Warranty
- Acebil Quick Release Slide Plate for CH8/CH9/CHX Head (XL)
- Acebil Left-Side Pan Bar for CH8 Tripod Head
- 2-Year Warranty
No posts found
