Cartoni Focus 22 Head with 2-Stage Carbon Fiber SmartStop Tripod with Mid-Level Smart Spreader Kit (100mm)

Cartoni Focus 22 Cine Tripod System Overview

Add a sturdy but lightweight tripod system to your kit with the Focus 22 Head with 2-Stage Carbon Fiber SmartStop Tripod with Mid-Level Smart Spreader Kit from Cartoni. The kit includes a Focus 22 fluid head, a side-loading quick release plate, a pan bar, a pan bar extender, a 2-stage SmartStop SDS carbon fiber tripod, a mid-level spreader, a rubber foo set, and a soft case to carry the entire kit.

The Focus 22 fluid head provides perfect balance along its 100mm half ball head, +/-90° tilt range, 360° panning range, and features continuous drag control adjustment, and it supports loads up to 48.5 lb. The SmartStop SDS carbon fiber legs weigh only 6.4 lb on their own and feature two stages that extend from 26 to 68" in height, including the head. The spiked feet can be converted for indoor use with the rubber feet.

Cartoni Focus 22 Cine Fluid Head (100mm Half Ball)

Add a sturdy fluid head to your kit with the Focus 22 Cine Fluid Head from Cartoni. The Focus 22 fluid head provides smooth balance along its 100mm half ball head, +/-90° tilt range, and 360° panning range. It features continuous drag control adjustment and supports loads from 6.6 lb up to 48.5 lb. Its cine-style camera plate mounts into the head via a side-load locking system.

The 100mm half ball head is compatible with Cartoni 100mm tripods. Its illuminated bubble level and easy-to-read counterbalance markings make it simple to use in any lighting conditions.

Key Features

• 100mm half ball base
• Supports loads between 6.6 to 48.5 lb
• Perfect balance along the entire +/-90° tilt range
• Cine-style side-load plate system
• Continuous counterbalance and drag
• Illuminated bubble level
• Includes a pan bar attachable on either side

Cartoni SDS Carbon 100 2-Stage Tripod Legs with SmartStop (100mm)

The SDS Carbon 100 is a 100mm bowl, two-stage carbon fiber tripod featuring SDS (Smart Deployment System) technology and excellent torsional rigidity. The SDS system uses a single lever to adjust both stages of the legs simultaneously, providing fast setup and breakdowns. Each lever is conveniently located at the middle stage of the leg, eliminating the need to reach overhead to lock/unlock the legs when they are raised. Made of lightweight yet durable cross-layered carbon fiber, the SDS Carbon 100 tripod supports up to 132 lb and has a height range of 10 to 63" when used with various spreaders.

SDS Single Lever Locking

• The SDS (Smart Deployment System) technology features an innovative clamping system, which allows instant release on both stages with a single lever per leg.
• Each lever is conveniently located on the middle stage of the tripod for fast and secure use.

Carbon Fiber Construction

This tripod features triple cross-layered carbon fiber construction, dual-stage legs, and a 100mm bowl base.

Height and Weight Capacity

• Supports camera rigs weighing up to 132 lb
• Has a height range of 10 to 63" depending on the spreader used.

Cartoni P732 Mid-Level Spreader - for 2-Stage Tripods

Suitable for fast moving ENG and EFP applications, the lightweight telescopic mid-level spreader adds only 1.0 lbs to your tripod and allows a very quick set-up. Its quick release attachment requires only a few seconds for being installed. Fits the L502 and L504 2-stage tripods.

EAN: 810054630425

Cartoni Hooking Rubber Tripod Feet (Set of 3)

These Cartoni Hooking Rubber Tripod Feet (Set of 3) can be pulled onto most Cartoni tripod models (except for Ultra-Light models) to provide non-slip contact with smooth surfaces. Each foot features a rubber strap (the " hook" ) that secures it in place on a corresponding nub on the tripod leg.

EAN: 810054630241

Cartoni Multi-Thread Rosette Extender (Large)

Increase the radius of the pan rotation of your Cartoni fluid head with this large Multi-Thread Rosette Extender from Cartoni. The compact and handy device allows you to extend the pan bar position on select Cartoni heads, including the Focus 18 and 22, the Master 25 and 30, and the Lambda 25. The versatile duralumin extender boasts two 1/4" -20 and two 3/8" -16 screw threads for mounting accessories while enhancing maneuverability and providing you with smooth and precise camera control.

Compatibility

The large rosette extender is compatible with the following Cartoni fluid heads: SDS18AXM, SDS18CXM, SDS22AXM, SDS22CXM, HF1800, KF18-3CS, KF18-1HM, KF18-2HM, KF18-2HG, KF182CHG, HF2200 KF22-1HC, KF22-2HC, KF222CHM, KF2221HC, KF2222HC, KF222FHM, HM3000, KMA3-1AM, and KMA3-1AG

Cartoni C928-2 Soft Bag for Two-Stage Cartoni Video Tripod with 75mm or 100mm Bowl

The Cartoni C928-2 Soft Bag is designed to accommodate a Cartoni two-stage video tripod with a 75mm or 100mm bowl and a compatible video head. Alternatively, it can be used to store or transport a tripod and head combination with a length, width, and depth measuring less than 37 x 7.5 x 7.5" when collapsed and placed on its side.

A durable, nylon construction and padded design protects this video tripod bag's contents which are accessible using a zippered closure. To ensure that the Cartoni C928-2 Soft Bag can always be shouldered, its features a built-in strap. Dual handles which can be joined using an integrated handle wrap allow this video tripod bag to be comfortably hand carried, while a side accessory pocket with a zippered closure provides additional storage space. For the display of a contents label or owner information, a see-through identification pocket is also included on this video tripod bag's exterior.

EAN: 810054630302