E-Image EG780A2D Overview
This 2-Stage Aluminum Tripod, Fluid Head, and Dolly Kit from E-Image includes the GA752 aluminum tripod legs, the EH780 75mm fluid video head, a GP1 tripod plate, two GB2 pan handles, and the EI-7003B heavy-duty floor dolly with cable guards. The aluminum legs incorporate E-Image's Mono-Lock design that allows you to adjust the leg height using the single locking lever at the top of each leg. The fluid head mounts into the 75mm bowl supports up to 22 lb when horizontal, and it supports up to 13.2 lb when using its counterbalance.
The dolly supports up to 88.2 lb and provides a smooth glide on a studio floor. Cable guards protect the wheels from getting caught on the cables. The legs feature a removable, adjustable mid-level spreader that allows you to set up the legs on uneven surfaces. They also incorporate spiked feet for increased grip on soft surfaces and spike covers that allow you to use the legs on hard/slippery surfaces.
EH780 Fluid Head
The EH780 fluid video head has a maximum safety payload of 22 lb and a counterbalance payload of 13.2 lb. The head includes two rosette GB2 pan handles and a GP1 quick release plate, and it fits onto a 75mm bowl. Pan and tilt drag can be continuously/variably adjusted, and the counterbalance is fixed to 13.2 lb.
GA752 Aluminum Tripod Legs
The GA752 video tripod legs can support up to 88 lb and utilize a convenient mono-lock system that allows you to lock and unlock both stages of each extendable leg with one motion. The legs include a removable GS-01 mid-level spreader and a set of F3 rubber feet. The feet are easily removable to reveal spikes that allow you to set up your shot on soft ground. The GA752 is topped off with a 75mm bowl for quickly adjusting the payload horizontally and/or vertically.
Mono-Lock
The heavy-duty tripod is made of aluminum, and the legs are a twin tube design with two stages. The E-Image Mono-Lock design allows you to control the height of both stages with a single twist-lock.
Heavy-Duty Dolly
The E-Image pedestal dolly supports up to 88.2 lb and is ideal for moving tripods along a flat surface for quick repositioning between shots. This dolly is perfect for both studio and on-location use where support for heavy setups is a requirement. When adjusted correctly, the cable guards will push away cables that are in the way when moving the dolly.
EAN: 847983034932
E-Image EG780A2D Specs
Key Specs
| Camera Mounting Screw | 1x 1/4"-20 Male 1x 3/8"-16 Male with Locating Pin |
| Camera Plate | Quick Release |
| Head Type | Fluid Head |
| Drag Control | Yes |
| Primary Leg Material | Aluminum |
| Load Capacity | 22 lb / 10 kg |
| Maximum Working Height | 72.2" / 183.4 cm |
| Minimum Working Height | 35" / 88.9 cm |
| Closed Length | Not Specified by Manufacturer |
Camera Attachment
| Camera Mounting Screw | 1x 1/4"-20 Male 1x 3/8"-16 Male with Locating Pin |
| Camera Plate | Quick Release |
Head
| Head Type | Fluid Head |
| Base Mount | 75 mm Half Ball |
| Counter Balance | Fixed (13.2 lb / 6 kg) |
Pan & Tilt
| Drag Control | Yes |
Legs
| Primary Leg Material | Aluminum |
| Leg Lock | Lever Lock |
| Leg Sections | 3 |
| Independent Leg Spread | No |
| Leg Positions | 3 Positions |
| Feet Features | Spiked |
General
| Load Capacity | 22 lb / 10 kg |
| Maximum Working Height | 72.2" / 183.4 cm |
| Minimum Working Height | 35" / 88.9 cm |
| Closed Length | Not Specified by Manufacturer |
| Accessory Mounting | 2x Pan Handle Fitting |
| Bubble Level | Yes |
| Spreader Support | Ground |
Packaging Info
| Package Weight | 26 lb |
| Box Dimensions (LxWxH) | 38 x 16 x 9" |
In the Box
- E-Image 2-Stage Aluminum Tripod, Fluid Head, and Dolly Kit (22 lb Payload)
- EH780 Fluid Video Head
- EI-7003B Dolly with Cable Guards
- 2-Year Manufacturer Warranty
No posts found
