Tripod, Head & LANC Zoom/Focus Controller Kit for Sony/Canon Cameras Overview
Set up your small Canon or Sony camcorder or DSLR camera with remote control using this Libec Tripod, Head & LANC Zoom/Focus Controller Kit put together. This kit includes a set of 3-stage tripod legs, a TH-X tripod head, and a ZFC-L LANC focus/zoom controller for select Sony and Canon LANC cameras.
The tripod system supports a rig weighing up to 9 lb and provides a 30 to 62" height range. The wired controller allows you to remotely control the focus, zoom, and REC start/stop of LANC-enabled cameras.
Libec TH-X Head and Tripod System
Provide stable support to your small camcorder, DSLR, or mirrorless camera with the Libec TH-X Tripod System. Mounted atop a two-stage (3-segment) tripod with a 65mm bowl, the TH-X head provides a sliding balance platform for optimal pan/tilt performance for loads up to 9 pounds. The drag and counterbalance are fixed, and both the pan and tilt can be locked. Rosettes on either side of the head can hold the pan bar for right and left-handed operators.
While the 65mm ball base offers quick-leveling capabilities when used with a tripod, it has a trick up its sleeve. The bottom of the base is flattened and has a 3/8" -16 thread in the center, enabling it to be secured to flat-mount accessories such as sliders, jibs, and more without unwieldy bowl adapters.
The included tripod offers a 30-62" height range for both lower and higher-angled shots. Thumbscrew-tightened leg sections secure the tripod, and the mid-level spreader provides stability and quick operation, even on uneven terrain and flooring.
Supports up to 9 lb
All-in-one tripod system for small camcorders and DSLR cameras
Dual head design for 65mm bowl tripods and flat base equipment with 3/8" -16 screws
Built-in counterbalance for precise camera balance and tilt movements
One-touch quick release sliding plate for easy camera balance adjustments
Sliding camera plate compatible with Sachtler and Manfrotto heads
Dual pan handle rosettes for additional pan handle or support arm
Rigid tripod legs for enhanced stability
Compact for collapsing and storing
Aluminum material and lightweight for easy mobility
Padded carrying case with shoulder strap and side pocket
Libec ZFC-L LANC Zoom and Focus Control for Select Sony/Canon Cameras
The Libec ZFC-L LANC Zoom and Focus Control enables remote REC start/stop, zoom, and focus control for LANC-equipped Canon and Sony camcorders (certain models may have limited or no compatibility). It connects to the camcorder via a 2.3' long cable terminated with a 2.5mm sub mini plug. The zoom speed can be adjusted by tilting the rocker. Its inverted switch allows you to control the zoom direction. The control unit features a clamp that easily mounts onto pipes up to 1.8" in diameter.
- Zoom speed can be adjusted by tilting the rocker
- The Inverted Switch is a new function that changes the zoom direction when the control is attached faced down
- Smooth and precise zoom controls with a smart double-sided rocker design enables you to have smooth and precise zoom controls
- The clamp can be attached to round tubes up to 45mm in diameter, wide enough to fit the TH-M monopod grip
Libec TH-X Head and Tripod System Specs
Head
Ball Diameter | 65 mm |
Counter Balance System | Fixed |
Tilt Drag | Fixed |
Tilt Range | +90° / -80° |
Pan Range | 360° |
Temperature Range | -4 to 140°F / 20 to 60°C |
Sliding Range | ±1.2" / ±30 mm |
Plate Attachment | 1/4"-20 screw with register pin |
Legs
Material | Aluminum |
Head Attachment Fitting | 65 mm bowl diameter |
Leg Stages | 2-stage (3-section) |
Lock Type | Twist |
Feet | Rubber |
Spreader | Mid-level brace |
General
Load Capacity | 9 lb / 4.1 kg |
Maximum Height | 62.6" / 159 cm |
Minimum Height | 29.7" / 75.4 cm |
Folded Length | 29.7" / 5.4 cm |
Weight | 6.9 lb / 3.1 kg |
Packaging Info
Package Weight | 10.65 lb |
Box Dimensions (LxWxH) | 32.3 x 8 x 7.5" |
Libec ZFC-L LANC Zoom and Focus Control for Select Sony/Canon Cameras Specs
Control Features | Zoom Control Start/Stop Recording |
Cable Length | 2.3' / 0.7 m |
Attachment Method | Tripod Clamp |
Clamping Range | 0.4 to 1.8 " / 10.00 to 45.00 mm |
Control
Control Features | Zoom Control Start/Stop Recording |
Connectivity
Cable Length | 2.3' / 0.7 m |
Mounting
Attachment Method | Tripod Clamp |
Clamping Range | 0.4 to 1.8 " / 10.00 to 45.00 mm |
General
Dimensions | H: 3.1 x W: 2.2" / H: 80.0 x W: 55.0 mm |
Weight | 4.23 oz / 0.12 kg |
Packaging Info
Package Weight | 0.385 lb |
Box Dimensions (LxWxH) | 3.7 x 3.65 x 3.65" |
In the Box
- Padded Carrying Case
- 3-Year Manufacturer Warranty
- 2-Years Manufacturer Warranty
No posts found