Miller CX14 Sprinter II, 2 Stage Aluminum Alloy Tripod System with Rubber Feet and Mid-Level Spreader

The Miller CX14 Sprinter II 2 Stage Aluminum Alloy Tripod System with Rubber Feet and Mid-Level Spreader includes a CX14 fluid head with pan handle, a Sprinter II 100mm 2-stage aluminum alloy tripod, a mid-level spreader, a set of three rubber feet, and an Arrowx two-stage soft case. The CX14 fluid head supports up to 30.9 pounds and employs CB Plus technology, providing 15+0 positions of counterbalance and 5+0 levels of pan and tilt settings with 2.4" of camera plate travel.

The head is matched with the 2-stage Sprinter II aluminum alloy tripod and together, the system has a height range of 23.7 to 66.6" . The included mid-level spreader is well suited for use when working on uneven terrain, while the included rubber boots cover the tripod legs spikes to protect delicate floors and provide grip on hard or slick surfaces. The soft case has removable back pack straps that allow you to carry the system without occupying your hands.

Miller CX14 Fluid Head

The Miller CX14 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. The head has a tilt range of +90 to -75° , which allows you to tilt the camera straight down, then nearly straight up. Pan, tilt, and counterbalance can all be set to zero, for totally free movement of the head, often useful for whip pans. The fluid head accommodates cameras and rigs weighing up to 30.9 pounds, more than adequate for use with small cinema cameras with rigs or medium sized ENG camcorders. The sideload plate design enables you to simply drop in your camera from the top without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.

The CX14 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX14 will perform reliably. The base of the CX14 is a removable 100mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX14 in dark environments. A fixed length pan handle is included, and an integrated second rosette is available for attaching an optional second pan handle.

With the head mounted level in your tripod legs (not included), you can tilt your camera straight down, and without adjusting the tripod tilt up to nearly straight up and down

The counterbalance settings enable you to tweak the head to neutralize the weight of the camera, so it stays in whatever tilt position you put it in without having to fight against gravity trying to tilt the camera forward or back, or fight against a spring trying to push the camera to level

The pan and tilt axes feature independent locks and drag adjustment

The 100mm ball base provides a wide platform making it easier to balance your camera on the head within the footprint of the head for more stable pan and tilt

The 100mm bowl base is removable, revealing a flat base with a 3/8" -16 threaded hole, well suited for sliders and other flat base applications

Threaded holes on both sides of the heads pan base enable mounting accessory blocks to the head

The unused rosette has a removable cover for protection

Extra camera tie-down screws mount in the top of the camera platform, making them easily available.

Miller Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)

The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.

Miller 993 Mid-Level Spreader

The Miller 993 Mid-Level Spreader is a mid-level spreader for Sprinter, Arrow 25/40, and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings, plus a latch and swivel design.

Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.

Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.