The SkyX 8 Head, HD 1-Stage Alloy Tripod, Mid-Level Spreader, Rubber Feet Kit from Miller includes the SkyX 8 fluid head, dual pan handles, a quick release plate, HD 1-stage alloy tripod legs, a mid-level spreader, and a rubber foot set.
The SkyX 8 Head, HD 1-Stage Alloy Tripod, Mid-Level Spreader, Rubber Feet Kit from Miller includes the SkyX 8 fluid head, dual pan handles, a quick release plate, HD 1-stage alloy tripod legs, a mid-level spreader, and a rubber foot set.
The heavy-duty SkyX 8 head is designed to accommodate a payload up to 87 lb and has 16 steps of counterbalance with CB Plus, a quick release plate with 4.7" of sliding range to balance your rig, a 150mm ball base, an illuminated bubble level, and two pan handles. The 1-stage legs are made from durable alloy and have a 31.5 to 62.6" height range, a mid-level spreader, removable rubber feet, a 150mm bowl, and a 37" transport length.
Miller SkyX 8 Fluid Head with Two Telescoping Pan Handles
The SkyX 8 Fluid Head with Two Telescoping Pan Handles from Miller is a heavy-duty fluid head with a 150mm ball base. The 16-position CB Plus fine-adjustment counterbalance system and a quick release camera plate together afford a load capacity up to 88 lb. The ball base can be adapted with an optional Mitchell base.
Pan drag and tilt drag each also have eight selectable positions (7+0), ranging from very light to heavy. Both pan and tilt drag feature a caliper disc brake system, and a quick release tilt lock pin serves as the tilt lock for payload protection. Two telescopic handles are extendable from 15.4 to 23.2" each. The quick release plate can be adjusted with a 4.7" sliding range.
Key Features
- Up to 82.5 lb load capacity
- 150mm ball base that can be adapted to Mitchell
- 8-position counterbalance system with CB Plus fine adjustment
- Euro camera plate included
- 4.7" plate sliding range
- 7+0 pan and tilt drag
- Pan and tilt drag caliper disc brake system
- Quick release tilt lock pin
- Two telescoping handles extend from 15.4 to 23.2" each
Miller EFP Aluminum 1-Stage Heavy-Duty Tripod Legs (150mm Bowl) - Supports up to 200 lbs (90 kg)
The Miller 943 aluminum tripod offers 150mm bowl fixing and Quik-Lok leg locking for rapid setup, yet supports up to 200 lb (90.7 kg) and offers the utmost in strength and tortional rigidity with the relative economy of aluminum alloy.
Quik-Lok rapid, non slip clamping system, with self-adjusting brake mechanism for smooth, positive clamp action
Split carry handle, splits apart for set up and combines for balanced, safe carriage when the tripod is collapsed
Miller 993 Mid-Level Spreader
The Miller 993 Mid-Level Spreader is a mid-level spreader for Sprinter, Arrow 25/40, and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings, plus a latch and swivel design.
Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.
Miller SkyX 8 Fluid Head with Two Telescoping Pan Handles Specs
Key Specs
| Camera Plate | Quick Release w/ Sliding Balance Plate: Large Euro Plate |
| Head Type | Fluid Head |
| Drag Control | Yes |
| Load Capacity | 87 lb / 39.5 kg |
Camera Attachment
| Camera Plate | Quick Release w/ Sliding Balance Plate: Large Euro Plate |
Head
| Head Type | Fluid Head |
| Base Mount | 150 mm Half Ball |
| Counter Balance | Incremental |
Pan & Tilt
| Drag Control | Yes |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Vertical Tilt | +90° to -75° |
| Lateral Tilt | No |
General
| Load Capacity | 87 lb / 39.5 kg |
| Accessory Mounting | 2x Pan Handle Fitting |
| Bubble Level | Yes (Illuminated) |
Miller EFP Aluminum 1-Stage Heavy-Duty Tripod Legs (150mm Bowl) - Supports up to 200 lbs (90 kg) Specs
Key Specs
| Head Mount Type | 150 mm Bowl |
| Primary Leg Material | Aluminum |
| Maximum Working Height | 61" / 154.94 cm |
| Minimum Working Height | 31" / 78.7 cm |
| Closed Length | 37.0" / 93.98 cm |
| Weight | 12 lb / 5.4 kg |
Legs
| Head Mount Type | 150 mm Bowl |
| Primary Leg Material | Aluminum |
| Leg Lock | Flip Lock |
| Leg Sections | 2 |
| Feet Features | Spiked |
General
| Maximum Working Height | 61" / 154.94 cm |
| Minimum Working Height | 31" / 78.7 cm |
| Closed Length | 37.0" / 93.98 cm |
| Weight | 12 lb / 5.4 kg |
Packaging Info
| Package Weight | 17.15 lb |
| Box Dimensions (LxWxH) | 45 x 13 x 11.5" |
Miller 993 Mid-Level Spreader Specs
General
| Construction | Alloy |
| Type | Mid-Level |
| Adjustable | Continuously Variable Through All Height Settings |
| Minimum Length | 12.4" / 315 mm |
| Maximum Length | 20.3" / 515 mm |
| Weight | 1.7 lb / 0.75 kg |
Packaging Info
| Package Weight | 2.385 lb |
| Box Dimensions (LxWxH) | 18.35 x 6.55 x 6.4" |
Miller 475 Rubber Feet Pads for Select Tripods (Set of 3) Specs
General
| Dimensions | L: 3.7" / L: 95 mm |
| Weight | 8 oz / 210 g |
Packaging Info
| Package Weight | 0.65 lb |
| Box Dimensions (LxWxH) | 7.35 x 5.85 x 5.2" |
In the Box
- Euro Camera Plate
- 2 x Pan Handle
- 3-Year Manufacturer Warranty
- 3-Year Manufacturer Warranty
- 3-Year Manufacturer Warranty
- 3-Year Manufacturer Warranty
No posts found
