Miller Versa CXV2 Head, 75 Sprinter II 2-Stage CF Tripod, Mid-Level Spreader, Rubber Feet & Soft Case Kit

Miller CompassXV 2 Tripod System Overview

The from Miller includes the Versa CXV2 fluid head, a pan handle, a quick release plate, the Sprinter II 2-stage carbon fiber tripod legs, a mid-level spreader, a shoulder strap for the tripod, and a soft carry case.

The Versa CXV2 head is designed to accommodate a payload up to 17.6 lb and has 16 steps of counterbalance with CB Plus, a quick release plate with 3.9" of sliding range to balance your rig, a 75mm ball base, an illuminated bubble level, and a fixed length pan handle. The 2-stage telescoping legs are made from lightweight carbon fiber and have a 30.2 to 66.8" height range, a mid-level spreader, a 75mm bowl, and a 34.1" transport length.

Miller Versa CXV2 Fluid Head with Pan Handle

The Versa CXV2 Fluid Head with Pan Handle from Miller is designed to accommodate a wide payload range with 16 steps of counterbalance with CB Plus for fine adjustments. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest cameras to be supported. Maxed out, this head is rated to support camera setups up to 17.6 lb, adequate for a rigged-up DSLR or mirrorless camera, a smaller cinema camera, or a small ENG camcorder. Securing your camera or rig is easy. The sideload quick release plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 3.9" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CXV2 is die-cast from a lightweight yet durable metal alloy with composite polymers and precision ball bearings for smooth mechanical operation. Even in harsh conditions, the CXV2 will perform reliably. The base of the CXV2 is a 75mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CXV2 in dark environments. A fixed-length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod (Mid-Level Spreader Ready)

The Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod is a quick-setup solution for a tripod head with 75mm ball base. Its lightweight, dual-action flip locks and rigid carbon fiber construction allow for durability without compromising usability in ENG, EFP, and other pro video applications.

Unlike many traditional multistage designs, both flip locks are located on the same section for easy reaching, no matter the height setting. The feet have integrated steel spikes to add stability on rough or uneven terrain. The fast setup is complemented by an in-line carry handle for portability on set or in the field. Compatible mid-level spreaders, rubber feet, and dollies are available separately.

Two-stage carbon fiber tripod for heads with 75mm ball

Maximum payload up to 66.1 lb

Compatible with separately available mid-level spreader

Height extends from 23.6 to 60.4"

Built-in carry handle for portability

Miller Basic Mid-Level Spreader for 75 Sprinter II Tripods

Set up your tripod quickly and safely with this Basic Mid-Level Spreader from Miller. The spreader is compatible with 75 Sprinter II tripods and easily latches onto the tripod legs. The telescopic design extends from a 15.8 to a 25" diameter and allows users to set the tripod leg angle for rapid setup. The durable aluminum spreader helps to stabilize the entire camera system, and its arms are secured with locking latches.

Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.

Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.