OZEN Agile 12 Tripod System Overview
The 12EZS 100mm Carbon Fiber Tripod & Agile 12S Fluid Head System from OZEN pairs the Agile 12S fluid head and the EZ 100mm two-stage carbon fiber tripod. This kit offers a 4.4 to 30.8 lb payload for midsized camera rigs thanks to the Agile 12S S-Loc camera mounting interface. The tripod has a height range of 24.4 to 65" to accommodate a wide range of perspectives. A mid-level spreader and deep-tread rubber feet ensure stability.
OZEN Agile 12S Fluid Head
Smooth your pans and tilts with the Agile 12S Fluid Head from OZEN. Designed for fast setup in ENG- and EFP-style shooting scenarios, the Agile 12S is equipped with a CNC-machined dial mechanism for crisp, repeatable counterbalance adjustment in 10 steps. The Agile 12S s versatile design enables you to quickly change camcorder configurations within a payload range of 4.4 to 30.8 pounds.
The Agile 12S is equipped with a 5/5 + 0 fluid drag mechanism and offers a tilt range of 90 to -80° . The considerable amount of fluid drag available at higher increments enables experienced operators to acquire full-zoom, pan/tilt-intensive images that are indistinguishable from those acquired in close. This fluid head uses the S-Loc camera mounting interface, which enhances the front-to-rear balance adjustment range to accommodate exceptionally front- or back-heavy camera setups.
Ergonomic pan/tilt fluid drag and counterbalance controls
Distinguishable, 90° opposed pan and tilt brakes
Replaceable pan bar rosettes for longer fluid head usability
Illuminated bubble level
Constructed of CNC-machined and anodized aluminum with stainless steel fasteners
Telescopic pan bar included
OZEN EZ 100mm Two-Stage Carbon Fiber Tripod with Mid-Level Spreader
Support large camera configurations with the OZEN EZ 100mm Two-Stage Carbon Fiber Tripod with its 55 lb load capacity and durable carbon fiber construction. The two-stage, three-section legs feature flip locks to adjust the 24.4 to 65" height range. A 100mm bowl base allows compatibility with 75mm fluid heads. Deep-tread rubber feet ensure stability on a variety of surfaces. Use the included mid-level spreader for additional security.
OZEN Agile 12S Fluid Head Specs
Key Specs
| Head Type | Fluid Head |
| Drag Control | Yes |
| Load Capacity | 30.8 lb / 13.97 kg |
| Weight | 6.5 lb / 2.95 kg |
In the Box
- Camera Plate
- Telescopic Pan Bar
- Spare Camera Plate Screws
- 2-Year Warranty; Extendable to 4 Years with Product Registration
- Contender Mid-Level Spreader
- Rubber Foot Set
- Carry Handle
- 4-Year Manufacturer Warranty
No posts found
