OZEN 8CF2HDS 75mm Carbon Fiber Tripod & Agile 8S Fluid Head System (S-Loc)

Get a tripod system that stands up to the demands of ENG and EFP production with the 8CF2HDS 75mm Carbon Fiber Tripod & Agile 8S Fluid Head System with S-Loc camera interface from OZEN. Comprising a 75mm 2-stage, heavy-duty carbon fiber tripod and an Agile 8S fluid head, this system works with 2.2 to 22 lb payloads. It offers 10-step counterbalance, 5/5 + 0 pan/tilt fluid drag, and working heights ranging from 31 to 68" using the included removable MLS100 mid-level spreader. If you need to go even further up, you can replace the included spreader with the separately available Contender heavy-duty mid-level spreader, which gives you a range of 31 to 72" . The 2-stage tripod is equipped with deep-tread rubber feet and comes with a SoftCase 100, which has a carry strap and an internal pouch for storing the included pan bar.

OZEN 75CF2HD 75mm Two-Stage, Heavy-Duty Carbon Fiber Tripod

Give your camera solid feet to stand on with the 75CF2HD 75mm Two-Stage, Heavy-Duty Carbon Fiber Tripod from OZEN. Designed for use with a separately available 75mm fluid head, this two-stage tripod supports a payload of 55 pounds and offers working heights ranging from 24 to 61" using the included, removable MLS100 mid-level spreader. If you need to go even further up, you can replace the included spreader with the separately available Contender heavy-duty mid-level spreader, which gives you a range of 24 to 65" .

For greater rigidity, the 75CF2HD's carbon fiber leg tubes are pin-secured to their anchors no glued joints. Highly visible flip brake levers are used to lock the legs into place. Moreover, the 75CF2HD comes equipped with deep-tread rubber feet for better traction on smooth surfaces.

Payload capacity of 55 pounds

Removable MLS100 mid-level spreader

Deep-tread rubber feet

Molded carbon fiber tubes are pinned to their joints, not glued

Flip-lock brakes are operator-adjustable for wear

OZEN Agile 8S Fluid Head

Smooth your pans and tilts with the Agile 8S Fluid Head from OZEN. Designed for fast setup in ENG- and EFP-style shooting scenarios, the Agile 8S is equipped with a CNC-machined dial mechanism for crisp, repeatable counterbalance adjustment in 10 steps. The Agile 8S's versatile design enables you to quickly change camcorder configurations within a payload range of 2.2 to 22 pounds.

The Agile 8S is equipped with a 5/5 + 0 fluid drag mechanism and offers a tilt range of 90 to -80° . The considerable amount of fluid drag available at higher increments enables experienced operators to acquire full-zoom, pan/tilt-intensive images that are indistinguishable from those acquired in close. This fluid head uses the S-Loc camera mounting interface, which enhances the front-to-rear balance adjustment range to accommodate exceptionally front- or back-heavy camera setups.

Ergonomic pan/tilt fluid drag and counterbalance controls

Distinguishable, 90° opposed pan and tilt brakes

Replaceable pan bar rosettes for longer fluid head usability

Illuminated bubble level

Constructed of CNC-machined and anodized aluminum with stainless steel fasteners

Telescopic pan bar included

OZEN Soft Case for Heavy-Duty 75mm and 100mm Systems

The OZEN Soft Case is a replacement case for heavy-duty 75mm and 100mm systems. This is the case typically included with 75AL2HD, 75CF2HD, 100AL2, and 100CF2 tripod systems. The case has an internal pouch for storing a pan bar and carry strap.