The OZEN Agile 5 Mini E-Z Load 75mm Fluid Head and 3-Stage Carbon Fiber Tripod System features an aluminum head designed specifically for handheld-sized mirrorless and DSLR cameras weighing up to 15 lb. The Agile 5 head offers 7+0 steps of counterbalance tailored to these types of cameras and 3+0 steps of ultra-smooth fluid pan and tilt drag. The head has a drop-in Mini E-Z Load camera plate system that allows for quick and easy mounting of your camera directly from above.
The head comes with an extendable pan bar that can be attached to either of two provided rosette mounts. A camera plate is also supplied and has both 1/4" -20 and 3/8" -16 mounting screws. Other features include independent pan and tilt locks and an illuminated bubble level.
The system also features a 75mm 3-stage carbon fiber tripod and a soft carry case. The tripod offers a height range of 15 to 62" and has efficient twist leg locks. The minimum height of 15" allows the flexibility to capture low-angle shots.
OZEN Agile 5 Mini E-Z Load 75mm Fluid Head
The OZEN Agile 5 is a 75mm half-ball fluid tripod head built for compact, handheld-size cameras. It s designed with 7+0 steps of counterbalance fine-tuned specifically for such small and lightweight cameras. With a counterbalance payload of 0-15 lb, the head supports these cameras with or without accessories. The Agile 5 features OZEN s Mini E-Z Load quick release camera plate system, which allows efficiently mounting your camera from the top, as opposed to sliding it in from the front.
The Agile 5 offers 3+0 steps of fluid pan and tilt drag and has independent pan and tilt locks. Drag is designed to be ultra smooth and to remain so through continued use. The " 0" setting being available for both counterbalance and drag, the Agile 5 is also highly suitable for still photography.
The head provides two rosette mounts and includes an extendable pan bar that can be attached to either the left or right rosette. The rosettes are replaceable for added longevity of the head. The supplied camera plate comes with both 1/4" -20 and 3/8" -16 mounting screws. An illuminated bubble level is also built in and powers on at the press of a button so you can balance the head in any environment.
Key Features
- 75mm half-ball fluid tripod head
- 7+0 steps of counterbalance tailored to handheld-size mirrorless/DSLR cameras
- 0-15 lb counterbalance payload
- Mini E-Z Load quick release camera plate system
- 3+0 steps of fluid pan/tilt drag designed to be ultra smooth over continued use
- Independent pan and tilt locks
- Two replaceable rosette mounts
- Extendable pan bar included
- Camera plate with 1/4" -20 and 3/8" -16 mounting screws
- Illuminated bubble level
- Aluminum build
OZEN 75CF3 75mm Telescoping Three-Stage Carbon Fiber Tripod
Give your camera solid feet to stand on with the 75CF3 75mm Telescoping Three-Stage Carbon Fiber Tripod from OZEN. Designed for use with a separately available 75mm fluid head, this lightweight three-stage tripod supports a payload of 33 pounds and offers a wide height range, going as low as 15" and as high as 62" . The 75CF3 is equipped with twist-ring brakes to lock the legs into place and does not require a spreader. For easy transport, it collapses into compact 23" bundle.
OZEN Agile 5 Mini E-Z Load 75mm Fluid Head Specs
Camera Plate
| Camera Plate Features | Quick Release |
| Camera Mounting Screw | 1 x 1/4"-20 Male 1 x 3/8"-16 Male |
Head
| Base Mount | 75 mm Half Ball |
| Counter Balance | Incremental 7-Step Plus 0 (0 to 15 lb / 0 to 6.8 kg) |
| Pan Handle Fittings | 2 x Rosette |
| Bubble Level | 1 x Illuminated |
Pan & Tilt
| Drag Control | Pan: Stepped 3-Step Plus 0 Tilt: Stepped 3-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -80° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
General
| Load Capacity | 0 to 15 lb / 0 to 6.8 kg |
| Operating Temperature | -40 to 140°F / -40 to 60°C |
| Weight | 5.46 lb / 2.48 kg |
OZEN 75CF3 75mm Telescoping Three-Stage Carbon Fiber Tripod Specs
General
| Head Mount Type | 75 mm Bowl |
| Maximum Working Height | 62" / 157.48 cm |
| Minimum Working Height | 15" / 38.10 cm |
| Closed Length | 23" / 58.4 cm |
| Materials | Carbon Fiber |
| Weight | 5.89 lb / 2.67 kg |
Legs
| Leg Lock Type | Twist Lock |
| Leg Sections | 4 |
In the Box
- Camera Plate with 1/4"-20 and 3/8"-16 Screws
- Extendable Pan Bar
- 2-Year Warranty (Extendable to 4 Years with Registration)
- 2-Year Warranty, Extendable to 4 Years with Product Registration
No posts found
