Sachtler flowtech 100 GS Carbon Fiber Tripod System with Cine 20 Fluid Head

The flowtech 100 GS Carbon Fiber Tripod System with Cine 20 Fluid Head from Sachtler pairs the Cine 20 fluid head and the carbon fiber flowtech 100 tripod legs with ground-level spreader. This kit offers a 66 lb load capacity for midsized camera rigs, as well as a sideload camera plate, 16 steps of counterbalance, and seven steps of pan/tilt drag. Carry the system with the included handle and bag for easy transport to set.

Sachtler Cine 20 Fluid Head (100mm Bowl)

Designed to support small to midsized camera rigs, the Sachtler Cine 20 Fluid Head has a load capacity range of 4 to 48 lb. This fluid head features 16 steps of counterbalance and seven steps of pan and tilt drag adjustment. A total tilting range of 170° makes framing your shots a breeze. Balance your rig on the fluid head using the sliding plate, which can adjust along 5.9" with SpeedBalance technology. The 100mm bowl diameter is compatible with various carbon fiber Sachtler tripods like the flowtech 100. Easily attach and detach your camera via the Sideload platform. An illuminated bubble level and telescopic pan handle make for intuitive adjustment.

Sachtler flowtech Carbon Fiber Tripod with Ground Spreader (100mm)

The Sachtler flowtech Carbon Fiber Tripod with Ground Spreader eschews the common single or double carbon fiber tube design and has redesigned the shape of the legs for improved torsional strength. The legs weigh 8.8 lb, yet they can support a payload of up to 66 lb and extend from a minimum height of 16.9" to a maximum height of 62.6" when using the included removable ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.

Each leg extends or retracts independently from the other two, and when detached from the spreader, each leg can pivot without affecting the other legs, especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground.

Features

Dual-stage, carbon fiber 100mm bowl tripod.

Three 3/8" -16 accessory mounting holes are integrated into the outside of the 100mm bowl.

The legs by themselves weigh only 8.8 lb but support up to 66 lb.

The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.

Each leg features a single clamping lever lock design at the top of the leg, near the 100mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a lock at the bottom to lower or raise the legs.

The legs incorporate a locking mechanism that enables the legs to move freely for working with a spreader, or to lock at one of three angles when working without a spreader.

With the spreader, the height range is 16.9 to 62.6" . However, if you remove the ground spreader and utilize the built-in locking mechanism, the usable height range is 10.2 to 60.2" .

Sachtler ENG 2 Padded Bag

The Sachtler ENG 2 Padded Bag is a soft tripod bag designed to carry various Sachtler tripods with fluid heads up to 35" long. The case is made from water-resistant Cordura nylon and can be carried by the interlocking handles or the attached, adjustable shoulder strap.

Construction

• Water-resistant Cordura nylon
• Padded interior
• Zipper closure

Carrying options

• Interlocking handles
• Attached, adjustable shoulder strap

Compatible with

• Sachtler DV 2, DV 4, DV 6 and DV 8 systems on ENG 75/2 D tripod
• Sachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on 2-fold extension or Speed Lock CF tripods