Sachtler Flowtech 75 MS Carbon Fiber Tripod System with Ace XL Mark II Fluid Head

Sachtler Ace XL MKII Tripod System Overview

The Flowtech 75 MS Carbon Fiber Tripod System with Ace XL Mark II Fluid Head from Sachtler pairs the Ace XL fluid head and the carbon fiber Flowtech 75 tripod legs with a mid-level spreader. This kit offers a 17.6 lb load capacity for midsized camera rigs, as well as a balancing camera plate, 9-step + 0 counterbalance, and 3-step + 0 pan/tilt drag. Carry the system with the included handle and bag for easy transport to the set.

Sachtler Ace XL Mark II Fluid Head (75mm Bowl)

The Sachtler Ace XL Mark II Fluid Head is designed to facilitate smooth pan and tilt movements with your cine-style camera configurations thanks to its 17.6 lb load capacity. The fluid head can be secured to 75mm bowl mount tripods. It has 9 + 0 steps of counterbalance and 3 + 0 steps of pan/tilt drag adjustment. A total tilt range of +90° to -75° allows for intuitive framing of your shots.

Mount your camera using the slide-in balancing plate with a 1/4" -20 screw and locating pin. With a sliding range of 4.1" , this head can adapt to any rig configuration. Additional features include a detachable pan bar and an illuminated bubble level. An integrated flat head base allows the Ace XL Mark II to be mounted onto a slider.

Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet

The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24" to a maximum height of 61" when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.

Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.

Note:

For select Sachtler 75mm fluid heads

Features

Dual-stage, carbon fiber, 75mm bowl tripod for most Sachtler 75mm fluid heads.

Weighs only 6.4 pounds but supports up to 44 pounds.

The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.

The included mid-level spreader allows you to work on uneven terrain such as stairs or rocks while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod s foot spikes.

Each leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don t have to bend down to loosen a leg lock at the bottom to lower or raise the legs.

The legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.

When closing the legs, there is room for the mid-level spreader to be folded up while remaining attached. The legs feature a magnetic locking system strong enough to hold them together during transport but allows you to easily release the legs when you want to set them up.

Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head

With dimensions of 36.6 x 7.9 x 9.1" , this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.

The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.

• Padded bag with dimensions of 36.6 x 7.9 x 9.1" , designed for carrying a flowtech 75 or TT tripod with an FSB fluid head
• 900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps
• Full-length zipper allows for easy access to the interior compartment
• Connecting hand straps, side handles, and D-rings available for transport
• Clear plastic window on one of the sides allows you to insert a name tag for easy identification