The Seeder T150C2 T150 Fluid Head with Two-Stage Carbon Fiber Tripod System with Mid-Level Spreader supports over 33 pounds of camera and rig, providing smooth camera movements. The head features a counterbalance range from 1 to 10 with independent pan and tilt drag settings of 1 to 7, with a zero setting for free movement.
The tripod system features a 100mm ball/bowl quick leveling system. The head incorporates a bubble level that features a push-button switch that illuminates it for 30 seconds. The system has a stable operating range of about 32" to just over 70" and the legs feature independent spread and incorporate rotating lever locks for comfortable and secure locking. The legs feature dual-spiked feet and include three removable rubber feet.
Fluid Head
The head features a 100mm ball, while the legs feature a 100mm bowl, for quick leveling
The head supports up to 33.07 pounds of camera and rig and incorporates 10 steps of counterbalance, along with pan and tilt drag range of 1 to 7 steps, with a zero setting for completely free operation
The sliding balance plate has a slot and captive 1/4" -20 and 3/8" -16 camera tie-down screws
One 1/4" -20 and one 3/8" -16 captive tie-down screw store in accessory screw holes in the head
The system comes with a single pan handle, but the head has two pan handle mounting rosettes, one on each side
Tripod Legs
Carbon fiber legs are lightweight, durable, and saltwater-corrosion resistant
The included mid-level spreader allows you to work on uneven terrain such as stairs or rocks while preventing the legs from flying apart
The legs feature dual-spiked feet, with removable rubber feet
The dual-spiked feet provide grip on soft surfaces such as sand or dirt
The included removable rubber feet protect delicate surfaces from the foot spikes and provide grip on hard surfaces
SEEDER T150 Tripod System Specs
Camera Plate
| Camera Plate Features | Sliding Balance Plate |
| Camera Mounting Screw | 2 x 1/4"-20 Male 2 x 3/8"-16 Male |
Head
| Base Mount | 100 mm Half Ball |
| Counter Balance | Incremental 10-Step |
| Pan Handle Fittings | 2 x Rosette |
| Bubble Level | 1 x Illuminated |
Pan & Tilt
| Drag Control | Pan: Stepped 7-Step Plus 0 Tilt: Stepped 7-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
General
| Load Capacity | 6.61 to 33.07 lb / 3 to 15 kg |
| Maximum Working Height | 70.08" / 178 cm |
| Minimum Working Height | 32.28" / 82 cm |
| Closed Length | 35.8" / 91 cm |
| Materials | Carbon Fiber |
| Operating Temperature | -40 to 140°F / -40 to 60°C |
| Weight | 13.71 lb / 6.22 kg |
Legs
| Leg Lock Type | Rotating Locking Lever |
| Independent Leg Spread | Yes |
| Leg Sections | 3 |
| Bubble Level | No |
| Feet Features | Spiked |
| Spreader | Mid-Level (Included) Ground (Not Included) |
In the Box
- SEEDER T150C2 T150 Fluid Head with Two-Stage Carbon Fiber Tripod System with Mid-Level Spreader
- PL100 Quick Release Plate
- PB100 Pan Handle
- 2 x 1/4"-20 Camera Tie-Down
- 2 x 3/8"-16 Camera Tie-Down
- 3 x Rubber Feet
- Padded Bag
- 2-Year Manufacturer Warranty
No posts found
