Acebil 150mm Ball Tripod Head with Dual Handles and Illuminated Bubble Level
This 150mm Ball Tripod Head from Acebil consists of a 150mm fluid ball head with dual telescoping handles and an illuminated bubble level. The head supports a maximum load of 132 lb.
The fluid head features a two-step counterbalance system and supports up to 99 lb of counterbalance weight. The pan and tilt systems each offer eight steps of drag with continuous motion, and its tilt angle is +90° & /-75° & .
The sliding, side-loading quick release plate offers two 3/8 -16 mounting screws, and spare 1/4 -20 and 3/8 -16 mounting screws are included. The head is also compatible with ARRI and OConnor mounting plates. The built-in LED-illuminated bubble level allows you to balance your camera in low light. Dual telescoping pan handles connect to the head on either side via rosette mounts.
150mm fluid ball head with dual telescoping pan handles and quick release plate
Load capacity of 132 lb
Counterbalance system supports up to 99 lb of counterbalance weight
LED-illuminated bubble level to assist balancing in low light
Plate includes two 3/8 -16 camera mounting plate screws spare 3/8 -16 and 1/4 -20 screws are included
Compatible with ARRI and OConnor mounting plates
This 150mm Ball Tripod Head from Acebil consists of a 150mm fluid ball head with dual telescoping handles and an illuminated bubble level. The head supports a maximum load of 132 lb.
The fluid head features a two-step counterbalance system and supports up to 99 lb of counterbalance weight. The pan and tilt systems each offer eight steps of drag with continuous motion, and its tilt angle is +90° & /-75° & .
The sliding, side-loading quick release plate offers two 3/8 -16 mounting screws, and spare 1/4 -20 and 3/8 -16 mounting screws are included. The head is also compatible with ARRI and OConnor mounting plates. The built-in LED-illuminated bubble level allows you to balance your camera in low light. Dual telescoping pan handles connect to the head on either side via rosette mounts.
150mm fluid ball head with dual telescoping pan handles and quick release plate
Load capacity of 132 lb
Counterbalance system supports up to 99 lb of counterbalance weight
LED-illuminated bubble level to assist balancing in low light
Plate includes two 3/8 -16 camera mounting plate screws spare 3/8 -16 and 1/4 -20 screws are included
Compatible with ARRI and OConnor mounting plates
Acebil CINE60 Specs
Camera Plate
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Plate Type | Sideload Plate |
| Camera Mounting Screw | 2 x 3/8"-16 Male |
| Balance Plate Sliding Range | 5.91" / 150 mm |
Head
| Base Mount | 150 mm Half Ball |
| Counter Balance | Incremental 2-Step |
| Bubble Level | 1 x Illuminated |
Pan & Tilt
| Drag Control | Pan: Continuous 8-Step Plus 0 Tilt: Continuous 8-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
General
| Load Capacity | 0 to 132 lb / 0 to 59.87 kg |
| Weight | 14.7 lb / 6.67 kg |
In the Box
- Acebil 150mm Ball Tripod Head with Dual Handles and Illuminated Bubble Level
- Spare 1/4"-20 Screw
- Spare 3/8"-16 Screw
- 2-Year Manufacturer Warranty
No posts found
