Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Bosch UHO-HGS-11 Outdoor Housing (24 VAC)
EAN: 800549769433
The UHO-HGS-11 Outdoor Housing from Bosch enables you to use Dinion CCTV cameras in an outdoor environment or in areas where the cameras need to be protected. For increased weather resistance, this aluminum housing comes with a built-in heater and blower and features liquid-tight cable entry. It also features side opening design for easy installation and camera setup, and the use of tamper-resistant screws for locking clasps to prevent unauthorized access.
Easy installation
The hinged, side-opening design allows easy installation of camera/lens combinations and gives access to controls even when the housing is mounted. Power and video cabling can be routed via feed-through fittings or external 4-pin power and BNC connectors at the rear of the housing. Feed-through entry holes in the base allow for even better cable management. Mounting holes in the base can be used to install the housing on a wide range of pan/tilt brackets, adjustable heads, and various other camera mounting brackets. The unit comes with tamper-resistant screws for the locking clasps to prevent unauthorized access.
Built-in Heater Blower
The aluminum housing has two heaters, one for window defrosting and one for the housing interior, and a blower. The interior heater maintains the internal temperature of the housing in cold temperature conditions to extend the lower temperature limit to -40°F (-40°C). The permanently powered window defroster heater and blower minimize fogging in high humidity locations.
Rugged
With a sleek design that meets IP66 and NEMA-4X standards, this housing is suitable for protecting your video surveillance equipment from adverse weather conditions.
EAN: 800549769433
The UHO-HGS-11 Outdoor Housing from Bosch enables you to use Dinion CCTV cameras in an outdoor environment or in areas where the cameras need to be protected. For increased weather resistance, this aluminum housing comes with a built-in heater and blower and features liquid-tight cable entry. It also features side opening design for easy installation and camera setup, and the use of tamper-resistant screws for locking clasps to prevent unauthorized access.
Easy installation
The hinged, side-opening design allows easy installation of camera/lens combinations and gives access to controls even when the housing is mounted. Power and video cabling can be routed via feed-through fittings or external 4-pin power and BNC connectors at the rear of the housing. Feed-through entry holes in the base allow for even better cable management. Mounting holes in the base can be used to install the housing on a wide range of pan/tilt brackets, adjustable heads, and various other camera mounting brackets. The unit comes with tamper-resistant screws for the locking clasps to prevent unauthorized access.
Built-in Heater Blower
The aluminum housing has two heaters, one for window defrosting and one for the housing interior, and a blower. The interior heater maintains the internal temperature of the housing in cold temperature conditions to extend the lower temperature limit to -40°F (-40°C). The permanently powered window defroster heater and blower minimize fogging in high humidity locations.
Rugged
With a sleek design that meets IP66 and NEMA-4X standards, this housing is suitable for protecting your video surveillance equipment from adverse weather conditions.
Bosch UHO-HGS Specs
Electrical
| Voltage | Supply: 24 VAC |
| Power Consumption | With blower: 45 W Without blower: 40 W |
| Camera | Maximum Power Consumption: 10 W |
In the Box
- Bosch UHO-HGS-11 Outdoor Housing (24 VAC)
- Sunshield
- 3-Year Manufacturer Warranty
No reviews found
