The MuxLab 500120 LongReach 16 Active CCTV Receiver Hub (UTP/UTP) with 16 ports is specifically designed to facilitate centralized cabling solution for medium and large CCTV installations through a twisted pair cable on both input and output. The UTP/UTP version allows ordinary Cat5 cable to be connected between the camera, hub, and DVR. When used in conjunction with MuxLab`s passive CCTV Baluns at the camera end, the hub supports up to 4500` (1371m) via Cat 5/6 twisted pair cable; this distance can be extended when connected directly to a CCTV monitor.
Featuring auto gain control that automatically enhances the brightness, sharpness and color intensity of the video signal based on the actual cable conditions, the hub eliminates the need for manual adjustments. The unit has ground loop isolation up to A±50V permanent voltage and A±100V surge for 3 seconds, and has a 3Afuse rating.
The 16-port CCTV hub includes a base unit (rack mount), rubber stand-offs for desktop installation, removable brackets for wall mount or desktop installation, external power supply, and LED indicators for power and video synchronization. The unit comes with a 110V/24VAC power transformer and can operate in temperatures ranging from 0-40° C.
The LongReach 16 Active CCTV Receiver Hub is fully compatible with third-party CCTV baluns, built-in twisted pair baluns and other baluns for complete CCTV cabling solution.
16-port receiver
UTP on input and output
Transmits up to 4500` (1371m) via Cat 5/6 UTP
Automatic gain control for brightness and sharpness
Ground loop isolation up to A±50V permanent voltage and A±100V surge for 3 seconds
Fuse protection
LED indicators for power and video sync
Includes rack mount, removable brackets for wall mount, rubber stand-offs for desktop installation
110V/24VAC/60 VApower transformer
Operating temperature of 0-40° C
Bandwidth - DC to 4.5 MHz
Supports NTSC/PAL/SECAM
Compatible with third-party CCTV baluns, built-in twisted pair baluns and other baluns for complete CCTV cabling solution
Regulatory - FCC & CE
MuxLab LongReach Specs
| Environment | CCTV equipment for security and surveillance. RS-343 (RS-170) , PAL |
| Devices | CCTV cameras, DVR, IP camera encoders, monitors, switchers, multiplexers and other CCTV equipment |
| Transmission | Transparent to the user |
| Bandwidth | DC to 4.5 MHz |
| Input | 1.5 Vp-p max, 100©, balanced |
| Output | 1.1 Vp-p, ± 1 dB, 75©, unbalanced |
| Insertion Loss | -14 dB minimum for luma, -60 dB minimum for chroma Determined by Automatic Gain Control |
| Return Loss | Greater than 15 dB over the frequency range |
| Common Mode Rejection | Greater than 40 dB @ 3.85 MHz |
| Maximum Distance | Via Cat 5/6 UTP: : Camera to Hub: 4,000` (1,219 m); Hub to DVR: 500` (152 m). Total: 4,500` (1,371 m) PAL: Camera to Hub: 3,000` (914 m); Hub to DVR: 350` (107 m). Total: 3,350` (1,021 m) |
| Automatic Gain Control | Automatic Gain Control for sharpness and luminosity |
| LED | Power: One (1) green LED. Video Sync: Sixteen (16) green LEDs |
| Cable Requirements | UTP: 24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz. Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000` (305 m) at 1 MHz. BNC: Impedance: 75 ohms at 1 MHz (RG59/U or RG6). |
| Connectors | (reverse polarity sensitive) Video Input from cameras: Sixteen (16) 2-pole screw terminals Video Output to DVR: Sixteen (16) 2-pole screw terminals or sixteen (16) BNC-F Ground: One (1) chassis ground lug |
| Compatible Devices | Compatible Baluns/Hubs: 500000, 500000R, 500009, 500021, 500022, 500023, 500024, 500100, 500101, 500132, 500130, 500133 |
| Power Supply | 240V/24VAC/60VA |
| Power Consumption | 40W RMS max. @ 24VAC RMS typical (floating; +15%, -10%) |
| Ground Loop Isolation | ± 50V max permanent voltage. ±100V max surge for 3 secs |
| Fuse Rating | 3A |
| Temperature | Operating: 32 to 104°F (0 to 40°C) Storage: -4 ~ +185°F (-20 ~ +85°C) Humidity: up to 95% non-condensing |
| Enclosure | Black |
| Mounting | Rackmount (factory default). Removable brackets for wallmount or desktop installation. Rubber stand-offs included for desktop installation. |
| Dimensions | 19 x 8.6 x 1.75" (48.3 x 21.7 x 4.4cm) |
| Weight | 4.6 lbs (2.1kg) |
Packaging Info
| Package Weight | 8.9 lb |
| Box Dimensions (LxWxH) | 27.3 x 11.4 x 3.2" |
In the Box
- MuxLab 500120 LongReach 16 Active CCTV Receiver Hub (UTP/UTP)
- Power Supply
- Removable Brackets for Wallmount or Desktop Installation
- Rubber Stand-Offs Included for Desktop Installation
- 2-Year Manufacturer Warranty
No posts found
