Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
i-PRO WJ-GXE500 4-Channel Real-Time Network Video Encoder
EAN: 791871507346
Integrate up to 4 analog cameras with your network surveillance system using the WJ-GXE500 4-Channel Real-Time Network Video Encoder from i-PRO. This encoder provides full frame H.264 video transmissions for all four channels, and it allows dual streaming in H.264 and JPEG formatting in both VGAand D1 image sizes. Equipped with motion interlace and progressive conversion, the encoder ensures that each frame is clear, even when the camera s subject is moving. Additionally, the device compensates for picture degradation caused by long-distance cabling, maintaining clear pictures over long transmission distances.
The encoder supports PTZ control of i-PRO cameras via coax, and you can also control other PTZ cameras with the RS-485 connection. Motion detection can be programmed in up to four different areas, and the encoder will trigger an alarm when motion is detected, when there is video loss, or when the camera s alarm is triggered. An SD/SDHC memory card slot provides manual, alarm, and backup upon network failure recording options. There is a selectable microphone and line input, providing full duplex bi-directional audio for interactive communication. This device supports PoE technology for data transfer and power over LAN cabling, and it can be rack-mounted when used with mounting brackets (available separately).
Full frame H.264 transmission for all 4 channels
Dual streams of H.264 (high profile) and JPEG at VGA/D1 image size
Motion adaptive interlace/progressive conversion allows every frame to be clear, even when the subject is moving
Compensates for picture degradation caused by long-distance cable, thereby maintaining clear pictures
Coaxial communication ensures control of i-PRO PTZ cameras via coaxial cable
Open command conversion table for RS-485 ensures control of PTZ cameras from various manufacturers
SD/SDHC memory card slot for manual recording, alarm recording, and backup upon network failure (JPEG)
Camera title displayed in up to 16 alphanumeric characters embedded in the image
Full duplex bi-directional audio allows interactive communication
PoE capability allows power to be supplied by simply connecting a LAN cable
Compact housing allows for rack mounting with mounting brackets (not included)
Alarm sources include 3 terminal inputs, VMD, camera site alarm, video loss, and i-PRO alarm
Video Motion Detector (VMD) with 4 programmable detection areas
Internet mode enables H.264/MPEG-4 images to be transmitted by HTTP protocol
Multi-language GUI and setup menu for versatile use
IPv4 and IPv6 protocols supported
EAN: 791871507346
Integrate up to 4 analog cameras with your network surveillance system using the WJ-GXE500 4-Channel Real-Time Network Video Encoder from i-PRO. This encoder provides full frame H.264 video transmissions for all four channels, and it allows dual streaming in H.264 and JPEG formatting in both VGAand D1 image sizes. Equipped with motion interlace and progressive conversion, the encoder ensures that each frame is clear, even when the camera s subject is moving. Additionally, the device compensates for picture degradation caused by long-distance cabling, maintaining clear pictures over long transmission distances.
The encoder supports PTZ control of i-PRO cameras via coax, and you can also control other PTZ cameras with the RS-485 connection. Motion detection can be programmed in up to four different areas, and the encoder will trigger an alarm when motion is detected, when there is video loss, or when the camera s alarm is triggered. An SD/SDHC memory card slot provides manual, alarm, and backup upon network failure recording options. There is a selectable microphone and line input, providing full duplex bi-directional audio for interactive communication. This device supports PoE technology for data transfer and power over LAN cabling, and it can be rack-mounted when used with mounting brackets (available separately).
Full frame H.264 transmission for all 4 channels
Dual streams of H.264 (high profile) and JPEG at VGA/D1 image size
Motion adaptive interlace/progressive conversion allows every frame to be clear, even when the subject is moving
Compensates for picture degradation caused by long-distance cable, thereby maintaining clear pictures
Coaxial communication ensures control of i-PRO PTZ cameras via coaxial cable
Open command conversion table for RS-485 ensures control of PTZ cameras from various manufacturers
SD/SDHC memory card slot for manual recording, alarm recording, and backup upon network failure (JPEG)
Camera title displayed in up to 16 alphanumeric characters embedded in the image
Full duplex bi-directional audio allows interactive communication
PoE capability allows power to be supplied by simply connecting a LAN cable
Compact housing allows for rack mounting with mounting brackets (not included)
Alarm sources include 3 terminal inputs, VMD, camera site alarm, video loss, and i-PRO alarm
Video Motion Detector (VMD) with 4 programmable detection areas
Internet mode enables H.264/MPEG-4 images to be transmitted by HTTP protocol
Multi-language GUI and setup menu for versatile use
IPv4 and IPv6 protocols supported
i-PRO WJ-GXE500 Specs
Video & Audio
Video Inputs | : 4x 1.0 V p-p / 75 Ohms composite video inputs (BNC) Multiplexed control data and cable compensation compatible: 1 to 4 channels PAL: 4x 1.0 V p-p / 75 Ohms PAL composite video inputs (BNC) Multiplexed control data and cable compensation compatible: 1 to 4 channels |
Microphone/Line Input | Mic IN and Line IN are selectable 1/8" / 3.5 mm stereo mini jack (monaural input) Applicable Microphone: Plug-in power type Supply Voltage: 2.5 V ±0.5 V Input Impedance: Approximately 2 kOhms |
Audio Output | 1/8" / 3.5 mm stereo mini jack (monaural output) line level |
Browser GUI
Camera Control | Pan / tilt / zoom / focus / preset positions / auto focus |
Display Mode | Spot, Quad: Image from 16 cameras can be displayed in 4 different quad screens (JPEG only) 20-character camera title |
Unit Title | Up to 20 characters |
Camera Title (OSD) | Up to 16 characters, On / Off |
Clock Display | Time: 12/24 H Date: 5 formats on the browser, Summer time (manual) |
Alarm Control | Reset |
One Shot Capture | A still picture will be displayed in a newly opened window |
Audio | Mic (Line) Input: On / Off Volume Adjustment: Low / Middle / High Audio Output: On/Off Volume Adjustment: Low / Middle / High |
SD Memory Data Download | Still or motion images recorded in the SD/SDHC memory card can be downloaded |
GUI/Setup Menu Language | : English, French (installation required for French) PAL: English, French, Italian, Spanish, German, Russian (installation required except for English) |
System Log | Up to 100 (internal) Up to 4,000 (SD memory when the recording format is set to JPEG) error logs |
Supported OS | Microsoft Windows 8, 7, Vista, XP SP3 |
Supported Web Browsers | Windows Internet Explorer 10.0 (32 bit), 9.0 (32 bit), 8.0 (32 bit), 7.0 (32 bit), 6.0 SP3 |
Network
Network IF | RJ45 10Base-T / 100Base-TX |
Image Resolution | : VGA Mode: VGA (640 x 480), QVGA (320 x 240) D1 Mode: D1 (720 x 576) PAL: VGA Mode: VGA (640 x 480), QVGA (320 x 240) D1 Mode: (720 x 576) |
H.264 / MPEG-4 | Transmission Mode: Constant bit rate / frame rate priority Frame Rate: 1 /3 / 5 / 7.5 / 10 / 15 / 20 / 30 fps PAL Frame Rate: 1 / 3.1 / 4.2 / 6.25 / 8.3 / 12.5 / 20 / 25 fps Bit Rate Client: 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps / Unlimited Image Quality: Low / Normal / Fine Refresh Interval: 0.2 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 seconds Transmission Type: Unicast / Multicast |
JPEG | Image Quality: 10 steps Refresh Interval: 0.1 fps to 30 fps PAL Refresh Interval: 0.08 to 25 fps JPEG frame rate will be restricted when displaying both JPEG and H.264 / MPEG-4 images Transmission Type: Pull / Push |
Audio Compression | G.726 (ADPCM), 32 kbps / 16 kbps, channel 1 only |
Audio Mode | Off / Mic (line) input / audio output / interactive (half duplex) / Interactive (full duplex) |
Authentication for Audio | Level 1 only / level 2 higher / all users |
Total Bit Rate | 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited |
Supported Protocols | IPv6: TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DNS, NTP, SNMP IPv4: TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP |
FTP Client | Periodic image transfer, alarm image transfer (when the FTP transmission has failed, backup on an optional SDHC/SD memory card is available) |
Number of Users | Up to 14 users (depends on network conditions) |
Storage | Alarm Recording / backup upon network failure / manual recording (JPEG only) Compatible SD (SDHC) Card: i-PRO 256 MB, 512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB |
Alarm
Alarm Source | 3 terminal inputs, VMD, command alarm, camera site alarm, video loss alarm |
Alarm Actions | SDHC/SD memory recording, email notification, alarm terminal output, indication on browser, FTP image transfer, i-PRO protocol output |
Alarm Log | With SDHC/SD Memory Card: 5,000 logs Without SDHC/SD Memory Card: 1,000 logs |
Input / Output
Terminal | Terminal 1: Alarm input Terminal 2: Alarm input / alarm output Terminal 3: Alarm input / alarm output / AUX output |
RS-485 | 1 x RS-485 (RJ11, 4 wire / 2 wire, full / half duplex) |
General
Safety/EMC Standard | : UL (UL60065), FCC (Part 15 Class A), C-UL (CAN/CSA C22.2 No.60065), DOC (ICES003 Class A) CE (EN55022, Class B, EN55024) |
Power Source and Consumption | 12 VDC: 500 mA PoE (IEEE 802.3af): 6 W (Class 0 device) |
Ambient Operating Temperature | 14 to 122 °F (-10 to 50°C) |
Ambient Operating Humidity | 90% or less (without condensation) |
Dimensions | 5.51 x 1.73 x 7.28" (140 x 44 x 185 mm), excluding rubber feet and projections |
Weight | Approximately 2.21 lb (1 kg) |
Packaging Info
Package Weight | 2.55 lb |
Box Dimensions (LxWxH) | 10.8 x 9 x 6.3" |
In the Box
- i-PRO WJ-GXE500 4-Channel Real-Time Network Video Encoder
- Software CD
- Code Label
- 2-Year Manufacturer Warranty
No posts found