The Audio Technica Consumer AT-VM95E/H is a kit that pre-mounts the AT-VM95E dual moving magnet cartridge on to the AT-HS6BK headshell.
Audio-Technica Consumer AT-VM95E Dual Moving Magnet Cartridge
The Audio-Technica Consumer AT-VM95E Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level (4.0 mV) with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required). All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli.
- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws “ no nuts required
- Compatible with any AT-VMN95 replacement stylus
Audio-Technica Consumer AT-HS6 9g Headshell Aluminum Die Cast Body (Black)
The black Audio-Technica Consumer AT-HS6 is a lightweight (9g) headshell mount. Featuring an aluminum die-cast body, it is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of the headshell to enable precise placement of the stylus onto the record. The headshell is equipped with quad wire terminals and comes with mounting hardware.
Audio-Technica Consumer AT-VM95E Dual Moving Magnet Cartridge Specs
Frequency Response | 20 Hz to 22 kHz |
Channel Separation | 20 (dB at 1 kHz) |
Tracking Force | 1.8 to 2.2 g (2.0 g Standard) |
Recommended Load Impedance | 47 kOhms |
Output | 4.0 mV (1 kHz, 5 cm/sec.) |
Channel Balance | 2.0 dB (1 kHz) |
Stylus Type | Bonded Round Shank |
Stylus Cantilever | Aluminum Pipe |
Mount | 0.5" / 1.27 cm |
Replacement Stylus | AT-VMN95C |
Impedance | Coil Impedance: 3.3 kOhms (1 kHz) |
DC Resistance | 485 Ohms |
Load Capacitance | 100 to 200 pF |
Coil Inductance (Le) | 550 mH (1 kHz) |
Vertical Tracking Angle | 23° |
Dimensions | 0.7 x 0.7 x 1.1" / 17.2 x 18.9 x 28.3 mm |
Weight | 0.2 oz / 6.1 g |
Packaging Info
Package Weight | 0.085 lb |
Box Dimensions (LxWxH) | 3 x 2.9 x 1.2" |
Audio-Technica Consumer AT-HS6 9g Headshell Aluminum Die Cast Body (Black) Specs
General
Compatibility | Not Specified by Manufacturer |
Physical
Color | Black |
Material of Construction | Aluminum |
Dimensions | 1.93 x 0.84 x 0.5" / 4.89 x 2.14 x 1.3 cm |
Weight | 0.3 oz / 9 g |
Packaging Info
Package Weight | 0.1 lb |
Box Dimensions (LxWxH) | 3.15 x 2.5 x 1.8" |
In the Box
- Set of Mounting Hardware (4 x Screws and 2 x Washers)
- 2-Year Manufacturer Warranty
- Mounting Hardware
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase