Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge
The Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2` mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The Shibata stylus has two radii, similar to an elliptical stylus, but longer and more narrow. This allows for more surface contact and effective pickup of ultra-high frequencies with less groove stress or distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SH ships with mounting hardware and a non-magnetic screwdriver.
Audio-Technica Consumer AT-HS6 9g Headshell Aluminum Die Cast Body (Black)
The black Audio-Technica Consumer AT-HS6 is a lightweight (9g) headshell mount. Featuring an aluminum die-cast body, it is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of the headshell to enable precise placement of the stylus onto the record. The headshell is equipped with quad wire terminals and comes with mounting hardware.
The Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2` mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The Shibata stylus has two radii, similar to an elliptical stylus, but longer and more narrow. This allows for more surface contact and effective pickup of ultra-high frequencies with less groove stress or distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SH ships with mounting hardware and a non-magnetic screwdriver.
- VM dual magnet cartridge with 2.7 x 0.26mm Shibata stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws-no nuts or washers required
- Compatible with any AT-VMN95 replacement stylus
Audio-Technica Consumer AT-HS6 9g Headshell Aluminum Die Cast Body (Black)
The black Audio-Technica Consumer AT-HS6 is a lightweight (9g) headshell mount. Featuring an aluminum die-cast body, it is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of the headshell to enable precise placement of the stylus onto the record. The headshell is equipped with quad wire terminals and comes with mounting hardware.
Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge Specs
Frequency Response | 20 Hz to 25 kHz |
Channel Separation | 23 (dB at 1 kHz) |
Tracking Force | 1.8 to 2.2 g (2.0 g Standard) |
Recommended Load Impedance | 47 kOhms |
Output | 3.5 mV (1 kHz, 5 cm/sec.) |
Channel Balance | 1.5 dB (1 kHz) |
Stylus Construction | Nude Square Shank |
Stylus Cantilever | Aluminum Pipe |
Mount | 0.5" / 1.27 cm |
Replacement Stylus | AT-VMN95SH |
Impedance | Coil Impedance: 3.3 kOhms (1 kHz) |
DC Resistance | 485 Ohms |
Load Capacitance | 100 to 200 pF |
Coil Inductance (Le) | 550 mH (1 kHz) |
Vertical Tracking Angle | 23° |
Dimensions | 0.7 x 0.7 x 1.1" / 17.2 x 18.9 x 28.3 mm |
Weight | 0.2 oz / 6.1 g |
Packaging Info
Package Weight | 0.09 lb |
Box Dimensions (LxWxH) | 4.1 x 2.85 x 1.35" |
Audio-Technica Consumer AT-HS6 9g Headshell Aluminum Die Cast Body (Black) Specs
General
Compatibility | Not Specified by Manufacturer |
Physical
Color | Black |
Material of Construction | Aluminum |
Dimensions | 1.93 x 0.84 x 0.5" / 4.89 x 2.14 x 1.3 cm |
Weight | 0.3 oz / 9 g |
Packaging Info
Package Weight | 0.1 lb |
Box Dimensions (LxWxH) | 3.15 x 2.5 x 1.8" |
In the Box
- Set of Mounting Hardware (4 x Screws and 2 x Washers)
- Non-Magnetic Screwdriver
- 2-Year Manufacturer Warranty
- Mounting Hardware
- 2-Year Manufacturer Warranty
No posts found