Enjoy enhanced audio quality with your favorite stereo pair of speakers and the silver gold Marantz MODEL 30 Stereo 200W Integrated Amplifier. It outputs up to 100W per channel at 8 ohms and features a dedicated phono input among its seven total stereo RCA inputs. The phono input features a switchable impedance to accommodate turntables with either MM or MC phono cartridges. The aluminum and steel chassis design helps the amplifier resist external interference.
Sound Master Tuning
This tuning technique helps ensure enhanced detail and musicality.
Discrete and Accurate Detailing
HDAM-SA3 technology incorporates dozens of independent parts, each selected for their unique sound signature. By curating individual parts rather than adopting an off-the-shelf solution, the HDAM of the MODEL 30 can outperform other integrated circuits to provide enhanced musicality.
Augmented Sensitivity
The MODEL 30 is engineered to replicate the sensitivity and feel of a vintage analog amplifier, even when simply adjusting the volume.
Musical Premium Phono EQ
The MODEL 30 is designed to deliver optimal sound quality by simplifying the signal path in the Phono EQ stage, allowing it to be used with both moving magnet and moving coil cartridges, thanks also to a built-in MC head amplifier. This design helps lower distortion, which is why the phono stage uses two-stage amplification, combining Marantz HDAMs with JFETs in the input stage for high input impedance. This allows the non-negative-feedback design to be further simplified by the deletion of coupling capacitors, further reducing distortion and enhancing signal quality.
MC/MM Phono Input Impedance Selector
To help optimize sound performance when using a turntable, and to accommodate as many configurations as possible, the MODEL 30 is equipped with a phono input impedance selector. Input impedances can be adjusted to MC LOW (33 ohms), MC MID (100 ohms), and MC HIGH (390 ohms).
Designed to Last
The solid chassis is constructed from non-magnetic aluminum panels and a rigid steel top cover to help mitigate external interference. Brass-machined independent input terminals for CD and Phono, plus nickel-plated speaker terminals help ensure the best signal possible.
Additional Features
- Discrete amp and preamp power supplies help reduce interference
- Toroidal transformer (with case) dedicated to preamp for clarity and power
- Current feedback preamp design with wide-range circuitry
- Linear volume control with electric volume system
- Switching amplifier circuit
- Bass, treble, and balance control
- Source Direct
- Power amp direct input
- Porthole OLED display
- App control via network player
- Edge lighting with dimmer
- Copper-plated side screw
- Triple-layer chassis
- PM6006-type foot
EAN: 699927170158
Marantz Model 30 Specs
Amplifier
| Amplifier Type | Integrated Amplifier (Preamp/Power Amp Combo) |
| Channels | 2.0 |
| Power Output per Channel | 100 W at 8 Ohms 200 W at 4 Ohms |
| Frequency Response | 5 Hz to 50 kHz |
| THD | 0.005% (1 kHz, 8 Ohms) |
| Speaker Impedance | 4 to 16 Ohms |
| Damping Factor | 500 |
Connectivity
| Rear A/V Inputs | 1 x Stereo RCA (Phono) with Ground Screw 6 x Stereo RCA |
| Rear A/V Outputs | 1 x Stereo RCA Recorder 1 x Stereo RCA Pre-Out |
| Front I/O | 1 x 1/4" / 6.35 mm Headphone Output |
| Other Rear I/O | 1 x RCA (Remote) Input 1 x RCA (Remote) Output |
| Speaker I/O | 2 x Binding Post Pair |
| Signal to Noise Ratio | Phono (MM): 88 dB Phono (MC): 75 dB Line: 107 dB |
Wireless Connectivity
| Wi-Fi | None |
| Bluetooth | None |
Power
| AC Input Power | 220 VAC, 60 Hz |
| Power Consumption | Active: 130 W Standby: 0.2 W |
Physical
| Dimensions (W x H x D) | 17.4 x 5.1 x 17.0" / 443.0 x 130.0 x 432.0 mm |
| Weight | 32.2 lb / 14.3 kg |
Packaging Info
| Package Weight | 38 lb |
| Box Dimensions (LxWxH) | 20.9 x 20.9 x 10" |
In the Box
- Marantz MODEL 30 Stereo 200W Integrated Amplifier (Silver Gold)
- Remote Control
- 2 x AAA Batteries
- Power Cord
- 3-Year Warranty
No posts found
