Parasound 2125 v2 Overview
Get THX certified power for your custom home theater installation with the New Classic 2125v2 2-Channel Power Amplifier from Parasound. The 2125v2 is a Class-AB amplifier, capable of delivering 150 watts per channel into 8 with two channels driven, or up to 400 watts in bridged mono mode.
The straightforward design features gold-plated connectors with a stereo RCA line input and loop-through output as well as four binding post terminal pairs for stereo or bridged mono speaker output. You can run speakers A, speakers B, or both, and the selection buttons on the front can be locked out on the rear panel to avoid accidental switching. Additionally, power on and off can be set to automatic signal sensing or 12V trigger options.
Additional Features
- THX Ultra2 certified for reference home theater sound
- High-current toroidal transformer
- Switchable high pass filter: off / 20 / 40 Hz
- Rear panel right and left gain knobs
- Impedance switch: 2-3 ohms / 4-8 ohms
- Detachable power cord
- Rack mountable with separately available kit: RMK22 kit
EAN: 791084200188
Parasound 2125 v2 Specs
Key Specs
| Channels | 2.0 |
| Power Output per Channel | 2-Channel Driven: 150 W at 8 Ohms 225 W at 4 Ohms |
| Rear A/V Outputs | 1x Stereo RCA |
| Speaker I/O | 2x Gold-Plated Binding Post Pairs |
| Wi-Fi | No |
| Bluetooth | No |
Amplifier
| Amplifier Type | Power Amplifier |
| Channels | 2.0 |
| Amplifier Class | Class-AB |
| Power Output per Channel | 2-Channel Driven: 150 W at 8 Ohms 225 W at 4 Ohms |
| Frequency Response | 20 Hz to 50 kHz ±3 dB (1 W) |
| THD | 0.25% (Full Power) |
| Speaker Impedance | 2 to 8 Ohms |
| Tone Control | No |
| Damping Factor | > 150 (20 Hz to 20 kHz) |
| Supported Sample Rates | No |
Connectivity
| Rear A/V Inputs | 1x Stereo RCA |
| Rear A/V Outputs | 1x Stereo RCA |
| Front I/O | No |
| Other Rear I/O | 1x 1/8" / 3.5 mm (12 V Trigger) Input 1x 1/8" / 3.5 mm (12 V Trigger) Output |
| Speaker I/O | 2x Gold-Plated Binding Post Pairs |
| HDCP Support | No |
| Media Card Slot | No |
| A/B Speaker Selection | Yes |
| Bi-Amp Capability | No |
| Input Impedance | 33 Kilohms |
| Input Sensitivity | 1 V |
| Signal to Noise Ratio | 114 dB (A-Weighted / Rated Output) 106 dB (Rated Output / Unweighted) |
| Crosstalk | 85 dB (1 kHz) 73 dB (10 kHz) 67 dB (20 kHz) |
| Wi-Fi | No |
| Bluetooth | No |
Control
| Mobile App Compatible | No |
Power
| Input Power | 110 to 240 VAC, 50 / 60 Hz |
| Power Consumption | Maximum: 550 W No Sound: 32 W |
Physical
| Dimensions (W x H x D) | 17.2 x 4.2 x 16.0" / 437.0 x 107.0 x 406.0 mm (including Protrusions, with Feet) |
| Weight | 27.1 lb / 12.3 kg |
In the Box
- Parasound New Classic 2125v2 2-Channel Power Amplifier
- AC Power Cord
- 3.5mm 12V DC Trigger Cable
- 2.5 to 3.5mm 12V DC Trigger Cable
- 2-Year Manufacturer Warranty
No posts found
