Parasound 275 v2 Overview
Get direct power for your custom home theater installation with the New Classic 275v2 2-Channel Power Amplifier from Parasound. The 275v2 is a Class-AB amplifier, capable of delivering 90 watts per channel into 8 with two-channels driven, or up to 200 watts in bridged-mono mode.
The straightforward design features gold-plated connectors with a stereo RCA line input and loop-through output as well as four binding-post terminal pairs for stereo or bridged-mono speaker output. You can run speakers A, speakers B, or both, and the selection buttons on the front can be locked out on the rear panel to avoid accidental switching. Additionally, power on and off can be set to automatic signal sensing or 12V trigger options.
Additional Features
- High-current toroidal transformer
- Switchable high-pass filter: off / 20 / 40 Hz
- Rear panel right and left gain knobs
- Impedance switch: 2-3 ohms / 4-8 ohms
- Detachable power cord
- Rack mountable with separately available kit: RMK11 kit
EAN: 791084200171
Parasound 275 v2 Specs
Key Specs
Channels | 2.0 |
Power Output per Channel | 2-Channel Driven: 90 W at 8 Ohms 150 W at 4 Ohms 1-Channel Driven: 200 W |
Rear A/V Outputs | 1x Stereo RCA |
Speaker I/O | 2x Gold-Plated Binding Post Pairs |
Wi-Fi | No |
Bluetooth | No |
Amplifier
Amplifier Type | Power Amplifier |
Channels | 2.0 |
Amplifier Class | Class-AB |
Power Output per Channel | 2-Channel Driven: 90 W at 8 Ohms 150 W at 4 Ohms 1-Channel Driven: 200 W |
Frequency Response | 20 Hz to 50 kHz ±3 dB (1 W) |
THD | 0.35% (Full Power) |
Speaker Impedance | 2 to 8 Ohms |
Tone Control | No |
Damping Factor | > 150 (20 Hz to 20 kHz) |
Supported Sample Rates | No |
Connectivity
Rear A/V Inputs | 1x Stereo RCA |
Rear A/V Outputs | 1x Stereo RCA |
Front I/O | No |
Other Rear I/O | 1x 1/8" / 3.5 mm (12 V Trigger) Input 1x 1/8" / 3.5 mm (12 V Trigger) Output |
Speaker I/O | 2x Gold-Plated Binding Post Pairs |
HDCP Support | No |
Media Card Slot | No |
A/B Speaker Selection | Yes |
Bi-Amp Capability | No |
Input Impedance | 33 Kilohms |
Input Sensitivity | 800 mV |
Signal to Noise Ratio | 110 dB (A-Weighted / Rated Output) 103 dB (Rated Output / Unweighted) |
Crosstalk | 80 dB (1 kHz) 72 dB (10 kHz) 65 dB (20 kHz) |
Wi-Fi | No |
Bluetooth | No |
Control
Mobile App Compatible | No |
Power
Input Power | 110 to 240 VAC, 50 / 60 Hz |
Power Consumption | Maximum: 350 W No Sound: 25 W |
Physical
Dimensions (W x H x D) | 17.2 x 2.5 x 16.0" / 437.0 x 63.0 x 406.0 mm (including Protrusions, with Feet) |
Weight | 20.1 lb / 9.1 kg |
In the Box
- Parasound New Classic 275v2 2-Channel Power Amplifier
- AC Power Cord
- 3.5mm 12V DC Trigger Cable
- 2.5 to 3.5mm 12V DC Trigger Cable
- 2-Year Manufacturer Warranty
No posts found