Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Klipsch Reference Series RF-7 III 2-Way Floorstanding Speaker (Walnut, Single)
EAN: 743878034851
Conjure the power, detail, and emotion of the live music experience in your home theater with the walnut Reference Series RF-7 III 2-Way Floorstanding Speaker from Klipsch. Featuring a 1.75 titanium diaphragm compression driver paired with an 8.5 90 x 90° & Tractrix horn and two 10 Cerametallic cone woofers, this floorstanding speaker delivers a frequency response of 32 Hz to 25 kHz. It can handle up to 250W of continuous power from your amplifier of choice.
1.75 Titanium Diaphragm Compression Driver
The compression driver s phase plug design improves phase coherency at the throat of the horn, resulting in improved sound pressure linearity at high frequencies.
90 x 90° & Tractrix Horn
The Tractrix horn uses a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension while enhancing imaging and dynamics. The compressed molded rubber construction adds high-frequency damping to reduce harshness, improve detail, and deliver clean, natural sound.
Spun Copper Cerametallic Woofers
Cerametallic woofers are designed to combine high rigidity with a lightweight construction to ensure minimal cone breakup and distortion. They pair seamlessly with the Tractrix horn-loaded compression driver to deliver enhanced speaker efficiency.
Tractrix Ports
Using Tractrix geometry, the RF-7 III ports ensure efficient air transfer from the cabinet for clean and powerful low-frequency response.
Dual-Chamber Enclosure Design
The bifurcated enclosure allows each 10 driver and port to work independently from each other. This improves the linearity of both drive systems, and minimizes standing wave problems inside the cabinet to prevent frequency anomalies in the sensitive mid-range frequencies
Cast Frame Woofer Design
Each 10 woofer is equipped with a heavy-duty cast aluminum frame for resonant-free operation. In addition, each woofer incorporates a dual shorting-ring magnet structure to eliminate modulation of the magnetic flux. This design results in improved linearity of cone movement.
Furniture-Grade Wood Veneer
The RC-7 III speaker s enclosure boasts a furniture-grade walnut wood veneer.
EAN: 743878034851
Conjure the power, detail, and emotion of the live music experience in your home theater with the walnut Reference Series RF-7 III 2-Way Floorstanding Speaker from Klipsch. Featuring a 1.75 titanium diaphragm compression driver paired with an 8.5 90 x 90° & Tractrix horn and two 10 Cerametallic cone woofers, this floorstanding speaker delivers a frequency response of 32 Hz to 25 kHz. It can handle up to 250W of continuous power from your amplifier of choice.
1.75 Titanium Diaphragm Compression Driver
The compression driver s phase plug design improves phase coherency at the throat of the horn, resulting in improved sound pressure linearity at high frequencies.
90 x 90° & Tractrix Horn
The Tractrix horn uses a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension while enhancing imaging and dynamics. The compressed molded rubber construction adds high-frequency damping to reduce harshness, improve detail, and deliver clean, natural sound.
Spun Copper Cerametallic Woofers
Cerametallic woofers are designed to combine high rigidity with a lightweight construction to ensure minimal cone breakup and distortion. They pair seamlessly with the Tractrix horn-loaded compression driver to deliver enhanced speaker efficiency.
Tractrix Ports
Using Tractrix geometry, the RF-7 III ports ensure efficient air transfer from the cabinet for clean and powerful low-frequency response.
Dual-Chamber Enclosure Design
The bifurcated enclosure allows each 10 driver and port to work independently from each other. This improves the linearity of both drive systems, and minimizes standing wave problems inside the cabinet to prevent frequency anomalies in the sensitive mid-range frequencies
Cast Frame Woofer Design
Each 10 woofer is equipped with a heavy-duty cast aluminum frame for resonant-free operation. In addition, each woofer incorporates a dual shorting-ring magnet structure to eliminate modulation of the magnetic flux. This design results in improved linearity of cone movement.
Furniture-Grade Wood Veneer
The RC-7 III speaker s enclosure boasts a furniture-grade walnut wood veneer.
Klipsch RF-7 III Specs
Speaker System
| Speaker Configuration | 2-Way |
| Power Handling | 250 W RMS 1000 W Peak |
| Bi-Amp Capability | Yes |
| Drivers | 2 x 10" / 254 mm Cerametallic Cone Woofer 1.75" / 44.45 mm Titanium Tweeter |
| Enclosure Type | Bass-Reflex |
| Ports | 2 x Rear-Firing |
| Frequency Response | 32 Hz to 25 kHz (±3 dB) |
| Impedance | 8 Ohms |
| Wired I/O | 2 x Binding Post Pair |
| Crossover | 1300 Hz |
| Sensitivity | 100 dB |
Physical
| Environmental Protection | None |
| Placement & Mounting Options | Floorstanding (with Included Hardware) |
| Grille | Cloth (Removable) |
| Dimensions | 13.9 x 49 x 17.9" / 35.3 x 124.5 x 45.5 cm (with Base) |
| Weight | 97.0 lb / 44.0 kg |
Packaging Info
| Package Weight | 110.4 lb |
| Box Dimensions (LxWxH) | 55 x 23.5 x 18.9" |
In the Box
- Klipsch Reference Series RF-7 III 2-Way Floorstanding Speaker (Walnut, Single)
- 5-Year Manufacturer Warranty
No posts found
