Audioengine HD3 Bluetooth Speaker System with S6 6' 210W Subwoofer Kit (Walnut/Gray)

The HD3 Bluetooth Speaker System with S6 6" 210W Subwoofer Kit includes a pair of walnut grain Audioengine HD3 wireless Bluetooth speakers and a gray S6 6" 210W subwoofer. The combination gives you a 2.1 speaker setup with impressive low-end bass for your streaming music or connected components, such as a turntable. The compact S6 connects easily to the HD3 speakers via their RCA output, making setup straightforward and easy.

Audioengine HD3 Bluetooth Speaker System (Walnut, Pair)

Enjoy your audio from nearly any source with this pair of walnut Audioengine HD3 Bluetooth Speaker System. They feature Bluetooth with aptX HD for wireless connectivity, stereo RCA and 1/8" inputs for traditional wired devices, and a micro-USB input for a dedicated input from your computer. The HD3 has a 2-way design with two built-in, 15W per channel amplifiers. Each speaker sports a 2.75" Kevlar woofer and a 0.75" silk dome tweeter.

No Missed Connections

Connect to the HD3 any way you like: wirelessly or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to the HD3 from just about anywhere in your house (within 100 ) without dropouts. Wireless setup is designed for simplicity and only takes about a minute. And if you re using the HD3 on your desktop, connect it with a USB cable. The USB input bypasses your computer s built-in headphone jack for an enhanced listening experience. If you re not keen on USB or wireless, you can still use any stereo RCA or 1/8" audio cable to connect.

Expandability

The HD3 is expandable, so if you want deeper bass, just connect your subwoofer.

Plug In Your Headphones

The HD3 includes a dedicated headphone output on the front panel, so you can listen without waking the neighbors. Its headphone amplifier is designed to deliver quality sound that drives even the most demanding headphones.

Retro-Forward Design

The HD3 features aluminum trim accents and detachable magnetic grilles designed to blend with any d cor.

Built-In Amplifiers

Built-in power amplifiers save space and eliminate the need to connect the HD3 to a stereo receiver or external power amp. Simply plug the left speaker into a power outlet and connect the included speaker wire from the left to the right speaker. All internal components of the HD3 are designed and tuned together for a more uniform sound than traditional separate speakers and amplifier.

Integrated Design

The speaker cabinets, drivers, bass port designs, amplifiers, and passive crossovers are all tuned together specifically for the HD3. This is designed to provide for a more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

Built-In B1 and D1

Features from the Audioengine B1 aptX HD Bluetooth receiver and D1 24-bit DAC are combined in the HD3 to help make it a complete digital audio system.

Bluetooth and aptX HD

The HD3 is designed to easily connect to any of your devices that have Bluetooth, but for enhanced sound quality, use a device that supports Bluetooth aptX HD. For Apple devices that don t have aptX HD, such as the iPad or iPhone, Apple generally uses the AAC codec. It sounds good as well, and you ll get the extra benefit of the upsampling 24-bit DAC.

Extended Wireless Range

Through signal management circuitry and antenna tuning, the HD3 offers a solution that has up to three times the range of standard Bluetooth for multi-room use with no degradation in audio quality.

24-Bit DAC

The HD3 Bluetooth receiver and USB input both utilize the PCM 5102 DAC, which is designed for low-noise and high-fidelity. The PCM 5102 is used as an upsampling DAC and will pad all bit depths to 24-bit, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the PCM 5102, the fact that digital signal is upsampled to 24-bits “ as well as the added benefit of onboard triple-redundancy power source conversion and filtering “ the HD3 Bluetooth implementation presents low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.

HD3 Headphone Amplifier

The HD3 contains a headphone amplifier based on the OPA2134 low-noise opamp. This amp is designed to provide low-impedance, high-fidelity audio and a 2V output, which can drive a wide range of headphones.

Amplifier Design

The amplifiers in the HD3 are located in the left speaker and are a class A/B analog monoblock design. This is a more traditional speaker/amplifier configuration, which is designed to provide quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for enhanced mechanical shock protection.

Driver Designs

The HD3 uses ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters are fashioned to hold up well under high power, and the edge-driven design gives a smooth response. The woofers are Kevlar-woven glass-aramid composite with rubber surrounds. Kevlar is designed for strength, so the woofer can retain its shape when being driven at high levels.

Magnetic Shielding

The speaker drivers in the HD3s are directly magnetically shielded.

Additional Features

• RCA and 1/8" audion inputs for easy connection to various audio sources, including a turntable or TV
• USB input for computer connection with up-sampling 24-bit DAC
• 0.75" thick MDF cabinets with wood veneer

EAN: 852225007032

Audioengine S6 6" 210W Subwoofer

Boost the bass of any system in small spaces with the Audioengine S6 6" 210W Subwoofer. It features a compact design and outputs up to 210W of peak power to add some extra oomph in space-constrained areas. Its stereo RCA and 3.5mm inputs let you connect nearly any source device, and wireless connectivity is possible with an optional adapter. The included stereo RCA and 3.5mm cables provide out-of-the-box connectivity.

Powerful Bass Extension for Small Spaces

The S6 sets a new standard for performance in an ultra-compact package. Measuring a modest 10 x 10" and weighing only about 15 lb, the S6 provides compact bass extension for your desktop, gaming rig, home theater, or any small setup.

Don t Let Its Size Fool You

Utilizing an efficient Class-D amplifier and a 6" long-throw woofer, the S6 has to be heard to be believed. And with a frequency response down to 33 Hz in a sealed-box design, bass is punchy, smooth, and deep. Adjustable crossover points between 40 and 130 Hz means you can dial in exactly the sound you want. With 210W of peak power, the S6 can fill most rooms with ease and, for its size, produces powerful sound.

Seamless Low-End Extension

The S6 features dual analog audio inputs and can connect to two systems at once. Want to save power? The S6 features a selectable energy saving auto-on mode that can detect when there is signal from your audio source. Want to go wireless? The optional Audioengine W3 system can be added easily using the USB charging port for convenient placement wherever you need.

EAN: 852225007315