SVS SoundPath Tri-Band Wireless Audio Adapter

SVS SoundPath Tri-Band Wireless Audio Adapter

EAN: 856677007886

Install your audio equipment up to 130 from your source with the SVS SoundPath Tri-Band Wireless Audio Adapter. It allows you to transmit audio signals from the RCA output of your source device to a subwoofer, amplifier, or powered speaker system up to 130 away, within line of sight. It outputs in 16-bit/48 kHz audio to help minimize loss of quality. It includes two mono RCA cables for virtually instant installation.

Tri-Band Technology Works Flawlessly in Congested Wireless Environments

The Tri-Band Wireless Audio Adapter auto-switches between the 2.4, 5.2, and 5.8 GHz wireless bands to select the most stable channel for uninterrupted audio playback. It s highly resistant to interference from Wi-Fi based security cameras, routers, smart TVs, and other wireless devices.

Uncompromised Sound Quality

This wireless system passes pristine 16-bit/48 kHz audio signal up to 130 with no noticeable delay.

Eliminates Audio Cable Clutter

The system streamlines home theater system setup by removing the need for long or complicated audio cables running along floors or walls.

True Stereo Signal

Left/right stereo signal transfer unlocks wireless connectivity for one or more subwoofers, a 2-channel zone of powered speakers, amplifiers, powered surround speakers, and more.

Full-Range Wireless Connectivity

This system transmits the complete audible frequency spectrum (6 Hz to 20 kHz, A±0.5 dB), providing a full-range wireless audio solution for subwoofers, powered speakers, and more. It s great for adding additional zones to create single source, multi-zone audio system.

Expands Placement Options

The system adds wireless connectivity, giving you more flexibility when placing subwoofers, powered speakers, and other audio components in a room, all without sacrificing performance.

Quick and Easy Setup

• Connect the transmitter to your A/V receiver, TV, or other audio source via RCA
• Connect the receiver to a subwoofer, powered speaker, power amplifier, or other line level devices
• Make sure both the transmitter and receiver are receiving power (through included wall adapter or USB source)
• Wait a few seconds for the adapters to sync and you re ready
• Up to three receivers can be paired to one transmitter to create a multi-room distributed audio system or for use with multiple powered subwoofers or speakers

When is the SoundPath Tri-Band System the Right Choice?

• When multiple wireless devices (microwaves, cordless phones, Bluetooth devices, etc.) are all operating in close proximity
• When you ve experienced interference in the past from routers, smart appliances, and more
• When connecting it to another wireless device like SVS Prime Wireless Powered Speakers, which have Wi-Fi and Bluetooth streaming capabilities
• When the subwoofer or powered speakers are further than 60 (line-of-sight) away from the transmitter

Additional Features

• Deters against both in- and out-of-band sources of interference, including: microwaves, wireless cameras, cordless phones, Bluetooth devices and more
• Operates seamlessly alongside 802.11b/g/n Wi-Fi
• Automatic receiver antenna diversity minimizes fading and multi-path effects
• Seamless RF band/channel switching