Audioengine HD3 Bluetooth Speaker System with DS1M Desktop Speaker Stands Kit (Satin Black, Pair)

Audioengine HD3 Overview

This Kit includes one pair of the Audioengine HD3 Bluetooth Speakers in satin black with a pair of the Audioengine DS1M Desktop Speaker Stands in black.

Audioengine HD3 Bluetooth Speaker System (Satin Black, Pair)

Enjoy your audio from nearly any source with this pair of satin black Audioengine HD3 Bluetooth Speaker System. They feature Bluetooth with aptX HD for wireless connectivity, stereo RCA and 1/8" inputs for traditional wired devices, and a micro-USB input for a dedicated input from your computer. The HD3 has a 2-way design with two built-in, 15W per channel amplifiers. Each speaker sports a 2.75" Kevlar woofer and a 0.75" silk dome tweeter.

No Missed Connections

Connect to the HD3 any way you like: wirelessly or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to the HD3 from just about anywhere in your house (within 100 ) without dropouts. Wireless setup is designed for simplicity and only takes about a minute. And if you re using the HD3 on your desktop, connect it with a USB cable. The USB input bypasses your computer s built-in headphone jack for an enhanced listening experience. If you re not keen on USB or wireless, you can still use any stereo RCA or 1/8" audio cable to connect.

Expandability

The HD3 is expandable, so if you want deeper bass, just connect your subwoofer.

Plug In Your Headphones

The HD3 includes a dedicated headphone output on the front panel, so you can listen without waking the neighbors. Its headphone amplifier is designed to deliver quality sound that drives even the most demanding headphones.

Retro-Forward Design

The HD3 features aluminum trim accents and detachable magnetic grilles designed to blend with any dcor.

Built-In Amplifiers

Built-in power amplifiers save space and eliminate the need to connect the HD3 to a stereo receiver or external power amp. Simply plug the left speaker into a power outlet and connect the included speaker wire from the left to the right speaker. All internal components of the HD3 are designed and tuned together for a more uniform sound than traditional separate speakers and amplifier.

Integrated Design

The speaker cabinets, drivers, bass port designs, amplifiers, and passive crossovers are all tuned together specifically for the HD3. This is designed to provide for a more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

Built-In B1 and D1

Features from the Audioengine B1 aptX HD Bluetooth receiver and D1 24-bit DAC are combined in the HD3 to help make it a complete digital audio system.

Bluetooth and aptX HD

The HD3 is designed to easily connect to any of your devices that have Bluetooth, but for enhanced sound quality, use a device that supports Bluetooth aptX HD. For Apple devices that don t have aptX HD, such as the iPad or iPhone, Apple generally uses the AAC codec. It sounds good as well, and you ll get the extra benefit of the upsampling 24-bit DAC.

Extended Wireless Range

Through signal management circuitry and antenna tuning, the HD3 offers a solution that has up to three times the range of standard Bluetooth for multi-room use with no degradation in audio quality.

24-Bit DAC

The HD3 Bluetooth receiver and USB input both utilize the PCM 5102 DAC, which is designed for low-noise and high-fidelity. The PCM 5102 is used as an upsampling DAC and will pad all bit depths to 24-bit, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the PCM 5102, the fact that digital signal is upsampled to 24-bits as well as the added benefit of onboard triple-redundancy power source conversion and filtering the HD3 Bluetooth implementation presents low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.

HD3 Headphone Amplifier

The HD3 contains a headphone amplifier based on the OPA2134 low-noise opamp. This amp is designed to provide low-impedance, high-fidelity audio and a 2V output, which can drive a wide range of headphones.

Amplifier Design

The amplifiers in the HD3 are located in the left speaker and are a class A/B analog monoblock design. This is a more traditional speaker/amplifier configuration, which is designed to provide quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for enhanced mechanical shock protection.

Driver Designs

The HD3 uses ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters are fashioned to hold up well under high power, and the edge-driven design gives a smooth response. The woofers are Kevlar-woven glass-aramid composite with rubber surrounds. Kevlar is designed for strength, so the woofer can retain its shape when being driven at high levels.

Magnetic Shielding

The speaker drivers in the HD3s are directly magnetically shielded.

Additional Features

• RCA and 1/8" audion inputs for easy connection to various audio sources, including a turntable or TV
• USB input for computer connection with up-sampling 24-bit DAC
• 0.75" thick MDF cabinets with wood veneer

EAN: 852225007056

Audioengine DS1M Desktop Speaker Stands (Black, Pair)

Experience the full range of frequencies your speakers have to offer with the pair of black Audioengine DS1M Desktop Speaker Stands. These steel stands provide 15° of vertical tilt to direct sound toward your ears and feature foam padding that provides grip and helps reduce vibration, so you can turn your speakers up without worrying about diminished sound quality.

Lift Your Listening Experience

Made with premium, hand-finished powder-coated steel, the DS1M speaker stands won t let you down when you re turning it up. Featuring 15° of fixed vertical tilt and foam padding, the DS1Ms are built tough to reduce surface vibration and give your speakers the stable isolation needed when you re cranking up the tunes.

Max Out Speaker Performance

Designed simply for smaller speakers, the DSM1s are the perfect addition where desktop space is limited but performance can t be compromised. As handsome as they are compact, they easily fit into any small setup and blend in with any dcor.

EAN: 852225007322